Allicdata Part #: | WW2FBR100-ND |
Manufacturer Part#: |
WW2FBR100 |
Price: | $ 0.15 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 0.1 OHM 1.5W 1% AXIAL |
More Detail: | 100 mOhms ±1% 1.5W Through Hole Resistor Axial Moi... |
DataSheet: | WW2FBR100 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.13061 |
Specifications
Series: | WW |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 100 mOhms |
Tolerance: | ±1% |
Power (Watts): | 1.5W |
Composition: | Wirewound |
Features: | Moisture Resistant |
Temperature Coefficient: | ±90ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.156" Dia x 0.370" L (3.96mm x 9.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
IntroductionThrough hole resistors are among the most common and simple electronic components. A through hole resistor is made up of a cylindrical body, two metal ends, and an insulating material in between the ends. This insulating material can be a variety of different materials such as glass, ceramic, or plastic. The metal ends are connected to conductive leads that allow for the electrical current to pass through the resistor and the insulating material. Through hole resistors are designed to be integrated into circuit boards, usually with one end of the resistor being connected to the ground and the other end to a voltage source. In this way, they are able to control the current in a circuit.WW2FBR100 Application Field and Working Principle
WW2FBR100 is a type of through hole resistor specifically designed to handle high temperatures and strong currents. It is also a four-wire component, meaning that it has two separate connections for both the ground and a voltage supply. WW2FBR100 can handle temperatures of up to 200 degrees Celsius and currents of up to 50 amps. It is usually used in power systems, electrical appliances, LED lighting systems, and other applications which need reliable resistor components.The working principle of WW2FBR100 is relatively straightforward. When current passes through the resistor, it will be partially blocked by the resistance of the resistor. The resistance will heat up the resistor, and the heat will be dissipated through the insulating material. The amount of heat dissipated will depend on the current that is being applied to the resistor. The higher the current, the higher the heat dissipation will be. The end result is that the amount of current through the resistor is reduced.Advantages
WW2FBR100 resistors have a number of advantages that set them apart from other types of resistors. First and foremost, their four-wire design allows them to handle higher temperatures and currents than other resistors. This makes them the ideal choice for many applications where high currents or temperatures are present. Additionally, their through hole design allows them to be easily integrated into a circuit board without the need for additional components. This makes them an ideal choice for low-volume applications as well as high-volume production.Another advantage of the WW2FBR100 is its long shelf life. When packaged correctly, this type of resistor will remain in good condition for up to 10 years. This makes them a great choice for those applications where long-term performance is essential. Finally, WW2FBR100 is also relatively inexpensive compared to other resistors. This makes them a suitable choice for applications where cost is an important factor.Disadvantages
Although the WW2FBR100 has many advantages, it also has some drawbacks. One of the main disadvantages is that due to its four-wire design the connection of the device can be quite complicated compared to a two-wire design. Additionally, the WW2FBR100 is not as sturdy as some other resistors. This means that it may not be the best choice for applications that require extreme reliability and durability. Finally, these types of resistors are not suitable for use in applications where there are temperature extremes or fluctuations.Conclusion
WW2FBR100 is a type of through hole resistor designed to handle high temperatures and currents. It has many advantages, such as its four-wire design, long shelf life, and low cost. However, it also has some drawbacks, such as its complexity and lack of durability in extreme conditions. Ultimately, whether or not the WW2FBR100 is the right choice for a particular application depends on the specific requirements of that application.
The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "WW2F" Included word is 22
Part Number | Manufacturer | Price | Quantity | Description |
---|
WW2FTR100 | Stackpole El... | 0.14 $ | 1000 | RES 0.1 OHM 1.5W 1% AXIAL... |
WW2FTR200 | Stackpole El... | 0.14 $ | 1000 | RES 0.2 OHM 1.5W 1% AXIAL... |
WW2FTR220 | Stackpole El... | 0.14 $ | 1000 | RES 0.22 OHM 1.5W 1% AXIA... |
WW2FTR330 | Stackpole El... | 0.14 $ | 1000 | RES 0.33 OHM 1.5W 1% AXIA... |
WW2FTR500 | Stackpole El... | 0.14 $ | 1000 | RES 0.5 OHM 1.5W 1% AXIAL... |
WW2FTR150 | Stackpole El... | 0.14 $ | 1000 | RES 0.15 OHM 1.5W 1% AXIA... |
WW2FBR100 | Stackpole El... | 0.15 $ | 1000 | RES 0.1 OHM 1.5W 1% AXIAL... |
WW2FBR180 | Stackpole El... | 0.15 $ | 1000 | RES 0.18 OHM 1.5W 1% AXIA... |
WW2FBR500 | Stackpole El... | 0.15 $ | 1000 | RES 0.5 OHM 1.5W 1% AXIAL... |
WW2FT1R00 | Stackpole El... | 0.12 $ | 1000 | RES 1 OHM 1.5W 1% AXIAL1 ... |
WW2FT1K10 | Stackpole El... | 0.12 $ | 1000 | RES 1.1K OHM 1.5W 1% AXIA... |
WW2FT1K20 | Stackpole El... | 0.12 $ | 1000 | RES 1.2K OHM 1.5W 1% AXIA... |
WW2FT10R0 | Stackpole El... | 0.12 $ | 1000 | RES 10 OHM 1.5W 1% AXIAL1... |
WW2FT100R | Stackpole El... | 0.12 $ | 1000 | RES 100 OHM 1.5W 1% AXIAL... |
WW2FT2K00 | Stackpole El... | 0.12 $ | 1000 | RES 2K OHM 1.5W 1% AXIAL2... |
WW2FT3R30 | Stackpole El... | 0.12 $ | 1000 | RES 3.3 OHM 1.5W 1% AXIAL... |
WW2FT4R70 | Stackpole El... | 0.12 $ | 1000 | RES 4.7 OHM 1.5W 1% AXIAL... |
WW2FT13R0 | Stackpole El... | 0.12 $ | 1000 | RES 13 OHM 1.5W 1% AXIAL1... |
WW2FT1R50 | Stackpole El... | 0.12 $ | 1000 | RES 1.5 OHM 1.5W 1% AXIAL... |
WW2FT5R00 | Stackpole El... | 0.12 $ | 1000 | RES 5 OHM 1.5W 1% AXIAL5 ... |
WW2FT825R | Stackpole El... | 0.12 $ | 1000 | RES 825 OHM 1.5W 1% AXIAL... |
WW2FB10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 1.5W 1% AXIAL1... |
Latest Products
SQM700JB-68K
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
SQM700JB-1R3
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RNC60J24R9FSB14
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RWR89S2R80DRS70
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RNC60J7503FSB14
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RWR81S3400FSB12
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...