WW2FT10R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The WW2FT10R0 is a type of through-hole resistor, designed for use in a variety of applications. The resistor is made up of a ceramic body and aluminum ends, which are connected to the leads. The leads are soldered to the component and provide the electrical connection to the board. The ceramic body is filled with a conductive material, usually a carbon ink, which creates the resistance and affects the rated power of the resistor. This design allows for the construction of a wide range of resistances without having to use large or bulky components.

The primary application of the WW2FT10R0 is in digital circuits and microprocessors, where its small size and low power consumption offer a number of advantages over other types of resistors. The low power consumption of the WW2FT10R0 allows it to be used in circuits that would otherwise be too power-hungry. Additionally, the small size allows it to be used where space is limited. The resistor can also be used in analog applications where a steady current is needed for a reliable operation.

The working principle of the WW2FT10R0 is fairly simple. When current passes through the resistor, the carbon ink inside creates resistance, which reduces the flow of current. The harder the carbon ink is pressed into the ceramic body, the more resistance it creates and the smaller the current that will pass through. This is the basis for the resistance rating of the resistor. The resistance rating is expressed as a number, usually ranging from 1 ohm to 1 million ohms or more depending on the application.

The WW2FT10R0 is an ideal choice for many applications due to its size, power consumption, and resistance range. It is a reliable and dependable component that can provide a high level of performance when used properly. Its size and power consumption make it particularly suitable for use in digital circuits, where it can provide a cost-effective and efficient way of creating the desired resistance. Additionally, it can be used in analog applications where a constant current is needed for reliable operation.

The specific data is subject to PDF, and the above content is for reference