ZL40253LDG1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ZL40253LDG1 is a Clock/Timing component, its application field is Clock Buffers, Drivers. Before we discuss further on its specific application field, let us first take a look at its basic working principle.

The ZL40253LDG1 is a Frequency Divider integrated chip which provides a frequency dividing function with a wide variety of output frequencies and operating modes. It is very flexible in terms of input and output frequencies and can provide accurate, high speed frequency division up to frequencies of around 100 MHz. It can also operate over a range of small frequencies down to low kHz levels.

The ZL40253LDG1 consists of a divide-by-2 stage, divide-by-4 stage, and divide-by-8 stage. It has two switchable Divide-by-4 stages and one switchable Divide by 8 stage. These three stages all have one Enable control pin which, when enabled, will allow the output frequency to be divided by four or eight, depending on which pin is enabled. The output of the three stages are all ORed together to generate the final output frequency. The output frequency can also be linked to a reference clock to provide lower jitter outputs.

The ZL40253LDG1 can be used as part of a design\'s clock division and synchronization functionality, providing clock division and synchronization of input signals. It is especially useful in designs that require very low jitter, high speed division of input signals as it is capable of accurate and reliable division of frequencies across a wide spectrum and at high speeds. It can also be used for frequency division and synchronization of signals requiring very long division periods.

The ZL40253LDG1 can be used in a variety of applications, from digitizing and synchronization of high speed signals, to division of clock waveforms. It is therefore especially useful in communication systems, network and telecom applications, and industrial control systems. This component can also be used for optimising the design of power over Ethernet (PoE) systems, or to improve system efficiency in timing applications.

The ZL40253LDG1 is especially useful in clock buffers and clock drivers applications, where it is used to divide an input signal by a given frequency to generate an output signal at a lower frequency. The output signal can then be used to generate an enable signal at the required rate to control devices such as FPGA\'s, ASIC\'s and clocks. It is also frequently used in synchronous circuits, frequency dividers, electronic timers, and memory decoding.

In conclusion, the ZL40253LDG1 integrated component is a Frequency Divider capable of accurate and reliable division of frequencies across a wide spectrum and at high speeds. It is especially useful in Clock Buffers, Drivers and other timing-related applications where the need for a low jitter signal output is paramount.

The specific data is subject to PDF, and the above content is for reference