ADP1614-650-EVALZ

Series:	--
Part Status:	Active
Main Purpose:	DC/DC, Step Up
Outputs and Type:	1, Non-Isolated
Voltage - Output:	5V
Current - Output:	4A
Voltage - Input:	2.5 V ~ 5.5 V
Regulator Topology:	Boost
Frequency - Switching:	650kHz
Board Type:	Fully Populated
Supplied Contents:	Board(s)
Utilized IC / Part:	ADP1614
Base Part Number:	ADP1614

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADP1614-650-EVALZ is an Evaluation Board for DC/DC and AC/DC (Off-Line) SMPS (switched mode power supply) applications. The board incorporates a high-power, 650V, 40A, double-output synchronous buck converter utilizing two ADP1614 devices.The ADP1614-650-EVALZ evaluation board provides a versatile demonstration platform for a wide range of DC/DC and AC/DC (Off-Line) SMPS applications. The board can be used to evaluate and verify the performance of the ADP1614, an 8 pin, 650V, 40A, high-power, double-output synchronous buck converter. The primary advantages of the ADP1614-650-EVALZ evaluation board include:• Versatile demonstration platform for a wide range of DC/DC and AC/DC (Off-Line) SMPS applications. • High-power, double-output synchronous buck converter. • 650V, 40A, 8 pin. • Easy to setup, configure and modify. • Replacement components available. The board is designed to enable users to quickly and efficiently configure, evaluate, and modify the component performances. The ADP1614-650-EVALZ evaluation board consists of pre-assembled components, jumpers, and resistors which can be used to quickly configure the board for a particular application. In addition, replacement parts are available for use in case of component failure or an application requiring a different operating condition. The ADP1614-650-EVALZ evaluation board utilizes the ADP1614, an 8 pin, 650V, 40A, high-power, double-output synchronous buck converter. The device is capable of converting a wide range of input voltages, from 4.5V to 20V, and can provide output voltages from 5V to 20V. The device is capable of delivering up to 40A of current and is designed to operate at switching frequencies up to 5MHz.The ADP1614-650-EVALZ evaluation board has a built-in input voltage level shifter which can be configured to shift the input voltage from the common 12V to the desired operation voltage. The device also includes an on-board soft start and power-on reset circuit which can be used to prevent the initial in-rush current from exceeding the maximum allowable levels. The ADP1614-650-EVALZ evaluation board can be used to simulate the operation of the ADP1614. The evaluation board can be used to test and validate the component\'s performance under various operating conditions by modifying the operating parameters. The evaluation board can be used to verify the device\'s operating characteristics in a wide range of conditions such as load and voltage transients, temperature cycling, and thermal overload conditions. The ADP1614-650-EVALZ evaluation board can also be used to configure the device for a specific application through the selection of external components such as inductors and capacitors. These components can be selected to meet the specific application requirements. In addition, the evaluation board provides the user with the flexibility to run simulations which can be used to investigate and analyze the behavior of the device in various operating conditions. The ADP1614-650-EVALZ evaluation board provides a cost-effective and user-friendly platform for testing, evaluating, and modifying the performance of the ADP1614, an 8 pin, 650V, 40A, high-power, double-output synchronous buck converter. The board is capable of operating at broad ranges of input and output voltages, allowing users to quickly and efficiently evaluate the performance of the device for a variety of DC/DC and AC/DC (Off-Line) SMPS applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description