1N1184

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N1184 is a single rectifier diode designed for general purpose applications. It is primarily used for the rectification of alternating current, or AC, to direct current, or DC to be used in various electronic circuits. In addition, it is also often used as a protection device to divert excess current away from sensitive components during periods of heavy transients.

In terms of its physical design, the 1N1184 diode is commonly constructed in the form of a miniature, hermetically sealed glass package. This package generally contains two main elements: the anode, or positive electrode, and the cathode, or negative electrode. The anode is marked with a “+” to indicate its polarity and the cathode is marked with a “-” to indicate its opposite polarity. This diode requires a minimum forward voltage of 1.0 volts and a maximum current rating of 0.5 amps to operate correctly.

The 1N1184’s primary application is in full-wave, or bridge, rectification. This method of rectifying AC to DC consists of four diodes arranged in a bridge configuration. Each of the two sides of the AC circuit is connected to the two ends of the diode bridge, where one of the two sides is connected to the “+” anode and the other is connected to the “-” cathode. In this configuration, the diodes continuously switch directions between forward and reverse bias to allow full-wave rectification to occur.

In addition to full-wave rectification, the 1N1184 diode may be employed for protection purposes. As a component designed to divert excess current away from sensitive elements, the 1N1184 can be used to protect other components from being damaged or destroyed due to large transient voltages or currents. In some cases, the 1N1184 may also be used to limit current flow through components to an acceptable level.

Overall, the 1N1184 single rectifier diode is an invaluable component in a variety of electronic applications. Its low-forward voltage requirement and high-current rating make it an ideal device for full-wave rectification, and its protection capabilities help ensure that other components are not damaged by high transients. This versatile component is an essential part of any circuit builder’s toolbox and can be used in a wide range of projects.

The specific data is subject to PDF, and the above content is for reference