1N4002_NL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N4002_NL is a single, axial-leaded, PN junction rectifier diode in a DO-41 plastic package. Its purpose is to block or pass current in one direction, functioning as a one-way switch. The 1N4002_NL is similar to other Diodes used for rectification, including the 1N4007, 1N4004, 1N4001, and 1N4003; however, the 1N4002_NL has the lowest maximum reverse voltage rating at 50 volts.

The 1N4002_NL is widely used as a low voltage power rectifier in power supply circuits, as well as general-purpose switching, surge protection, and clamping applications. It is also widely used in applications requiring high voltage, low current protection.

The working principle of the 1N4002_NL is based on the diode’s ability to conduct current in only one direction. In a forward-biased circuit, current flows in the diode’s anode-to-cathode direction. The diode is reverse-biased when a voltage greater than the maximum reverse voltage rating is applied to the anode. The 1N4002_NL has a maximum reverse voltage rating of 50V and is therefore most suitable for low voltage protection applications.

The 1N4002_NL is most commonly used in power supplies, where it can be used to block voltage and pass current in a single direction. It is also used in applications such as current-limiting circuits and switching circuits, where it can be used to protect against sudden surges of current. It is also used in DC-DC step-up or boost converters in which it can be used to regulate or limit the current output.

In a bridge configuration, the 1N4002_NL allows rectification of alternating current (AC), creating direct current (DC). This is accomplished by connecting the anode of the diode to a positive voltage, and the cathode to a negative voltage. Then, when a positive AC voltage is applied to the anode, the circuit is forward-biased so the diode will conduct current. When a negative AC voltage is applied to the anode, the circuit is reverse-biased so the diode will not conduct current.

In summary, the 1N4002_NL is a single, axial-leaded, PN junction rectifier diode with a maximum reverse voltage rating of 50V, most commonly used for low voltage protection in applications such as power supplies and DC-DC step-up or boost converters. It is also used for general-purpose switching, surge protection, and clamping applications.

The specific data is subject to PDF, and the above content is for reference