1N4004-N-0-4-AP

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	1A (DC)
Voltage - Forward (Vf) (Max) @ If:	1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	5µA @ 400V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-41
Operating Temperature - Junction:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 1N4004-N-0-4-AP

The 1N4004-N-0-4-AP is a rectifier diode that is commonly used in electronic circuits. It is a four-layer diode, with two layers of P-type material and two layers of N-type material as the semiconductor material. This combination makes the 1N4004-N-0-4-AP an efficient rectifier device.

Application Fields

The 1N4004-N-0-4-AP is mainly used in power supplies and other applications where a rectifying diode is needed. It is suitable for high-current applications, with a maximum reverse current of 50mA at 25°C. It is also suitable for use in low-frequency, high-current rectification applications such as AC to DC power supply circuits. The 1N4004-N-0-4-AP has also found use in electronic circuits where a voltage regulator is needed. When connected in series with a voltage regulator IC, it can be used to limit the voltage output from the regulator IC, which helps to protect the IC from being damaged from excess current or voltage.

Working Principle

The 1N4004-N-0-4-AP works by allowing only one type of current to flow through it, depending on the application. In an AC-to-DC power supply circuit, the 1N4004-N-0-4-AP allows only the positive AC cycles to pass through, blocking the negative AC cycles. This creates a DC output from the power supply circuit.In applications such as voltage regulation, the 1N4004-N-0-4-AP is connected in series with a voltage regulator IC. In this case, the diode will allow voltage to pass in one direction only, allowing the IC to limit the output from the regulator IC to the desired voltage.

Conclusion

The 1N4004-N-0-4-AP is a four-layer rectifier diode that is commonly used in power supplies and other applications where a rectifying diode is needed. It is suitable for high-current applications and can also be used as a voltage regulator. The working principle of the diode depends on the application, but in general it allows only one type of current to pass through, depending on the direction of the applied voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description