2026-07-C3FLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube (GDT) arresters are pieces of electrical equipment that are used to protect electrical systems such as power lines and transformers from the damaging effects of lightning and other transient voltages. GDT arresters are installed upstream of electrical equipment and must be able to ensure that no abnormally high voltage can pass through the system to reach the protected equipment.

GDT arresters are typically made of two zinc oxide elements connected in series with an isolating resistor, or a spark gap. The two elements are designed to act as a current-limiting element, with one element, known as the spark gap, being used to limit the current to a safe level before it can reach the other element, referred to as the spark arrester. The spark arrester is responsible for dissipating any further energy that may have been stored in the electrical circuit.

2026-07-C3FLF is a gas discharge tube arrester with F-type lightning impulse absorption characteristics. It is suitable for power systems above 10kV, such as medium and when lightning occurs, it works with lightning arresters to ensure the safety of the power equipment and power lines. Its anti-surge capability is excellent, which is 5 times higher than the specified value. The insulation strength can reach up to 100MV/m, and the system insulation space can also be extended.

The working principle of 2026-07-C3FLF is based on its ability to absorb and disperse the energy of transient lightning strikes. When a lightning strike occurs, the arrester absorbs and dissipates the energy, providing protection to downstream equipment. The arrester also acts as a current limiting element, limiting the amount of energy that is allowed to pass to downstream equipment. The spark gap allows the arrester to limit the amount of current to a safe level before it can pass through to the other element.

The 2026-07-C3FLF arrester is designed with a layer of insulating material between the spark gap and the spark arrester that helps to keep the voltages separate from each other and prevents any additional energy from passing through to the protected equipment. This allows the arrester to provide a high level of protection while still allowing the protected equipment to operate with the natural voltages of the system.

In addition, the 2026-07-C3FLF arrester has a number of other features. It is designed to be used in combination with surge protective devices, helps reduce the risk of power surges and also helps to reduce the chances of false peaks and suppressed lightning. All of these features make it a highly reliable protection device.

In conclusion, the 2026-07-C3FLF gas discharge tube arrestor is an ideal solution for protecting electrical systems from the damaging effects of lightning and other transient voltages. It is designed with a number of features that make it highly reliable and provide a great level of protection to electrical systems. It is also designed to be used in combination with other surge protective devices, helping to reduce the risk of power surges and false peaks.

The specific data is subject to PDF, and the above content is for reference