2026-35-CLF

Series:	TRIGARD® 2026
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Voltage - DC Spark Over (Nom):	350V
Impulse Discharge Current (8/20µs):	20000A (20kA)
Tolerance:	±20%
Number of Poles:	3
Fail Short:	No
Mounting Type:	Through Hole
Package / Case:	Axial Cylinder, 3 Lead (T-Shape)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Gas Discharge Tube Arresters (GDT)

Gas Discharge Tube Arresters, also known as GDTs, are a form of lightning arrestors or surge protectors that are commonly used for protecting electronic circuits, equipment, and systems in industrial and power applications at mains voltages. Using a combination of gas tubes and spark gaps, GDTs are able to absorb short-duration over-voltages and will safely dissipate the energy in to prevent harm to sensitive equipment.

Overview of 2026-35-CLF Application Field and Working Principle

The 2026-35-CLF is a type of GDT that covers an insulation voltage range of 2000V - 3500V (peak) and is available with a discharge current of 2KA (8x20μs), making it suitable for medium-voltage applications. It is designed to operate efficiently in a wide range of temperatures, from -50°C to +85°C, making it suitable for use in harsh environments. It is widely used in industrial and power applications, such as power switching, protection relays, data lines, motor control, lighting, and many other applications. The 2026-35-CLF offers an improved solution to traditional surge protection applications, featuring a highly-sensitive response and an extremely fast response time. It works by redirecting the high-energy surge current away from the protected equipment, and safely discharging it through an appropriately-sized gas discharge tube. The physical design of the GDT is such that it allows for both high- and low-energy surge currents to be dissipated through its high-speed gas discharge tubes. This helps to minimize the risk of equipment damage, as the spark gap can absorb the energy of the surge current before it can reach the protected equipment. In order for the 2026-35-CLF to function efficiently, a suitable protective device must be connected to the GDT – typically either a fuse or a breaker. The protective device will control the flow of the surge current and will disconnect the GDT from the circuit when current levels exceed the limit. In addition, the 2026-35-CLF should not be installed directly on the power line. Instead, it should be connected to the system via a short jumper or busbar, and it should be located far enough from the terminal to prevent instability.

Conclusion

In conclusion, the 2026-35-CLF is a reliable and effective surge protection solution for industrial and power systems. It works by redirecting the high-energy surge current away from sensitive equipment and safely dissipating it through its highly-sensitive gas discharge tubes. The 2026-35-CLF can operate efficiently over a wide temperature range and is suitable for a range of different applications. For optimal performance, the GDT should be connected to an appropriate protective device and installed on a short jumper or busbar away from power terminals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description