2027-25-SMLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas discharge tube arresters (GDT) are an essential part of modern power systems. They are used to protect power plants, telecommunications networks and other electronic equipment from the effects of lightning and transient overvoltages. Gas discharge tube arresters, or GDTs, are power line surge protection devices made up of two electrodes and a gas-filled gap between them. As the gap is filled with an ionised gas, it can be used to discharge large amounts of electricity in a controlled manner when it comes in contact with high voltage. GDTs are generally used in combination with other types of surge protection devices such as varistors, surge suppression capacitors and power fuses.

The 2027-25-SMLF application field and working principle refer to gas-filled metal lined spark gap (GMLSG) GDTs. These types of GDTs are designed to protect power lines and other equipment from destructive surges and to allow non-destructive surges to pass through. The 2027-25-SMLF GDT consists of three main components: a spark gap, a metal lining and an elastomer insulation. The spark gap is an electrically-charged gap in which the electricity arcs when the applied voltage across it exceeds the breakdown voltage. The metal lining insulates the spark gap from the elastomer insulation and the equipment, thus reducing the chance of electric shock. Finally, the elastomer insulation isolates the inner components of the GDT from the outside environment while providing a damping effect.

The 2027-25-SMLF GDT has a voltage rating of 25kV, making it suitable for medium-voltage applications. The device also has a 9 kA surge current rating, allowing it to withstand large amounts of short-term currents. In terms of size, the 2027-25-SMLF is relatively small compared to other GDTs, measuring only 20 x 27mm. As a result, the device is a popular choice for applications with limited space.

When energised, the spark gap in the 2027-25-SMLF GDT limits the amount of voltage that is able to pass through the device. If a voltage higher than the permitted level is applied, the material in the spark gap arcs and breaks down, which causes the voltage to be discharged. This allows the GDT to protect the line and equipment from any further surges. When the surge is over, the point where the spark gap had broken down will be re-ionised, allowing the device to resume its operation.

When installed correctly, the 2027-25-SMLF GDT can offer reliable protection against surges, as well as reliable current-limiting capabilities. It is important to remember, however, that the 2027-25-SMLF GDT is not a substitute for fuses or other protection devices, as it does not provide short-circuit protection. To ensure that your system is properly protected, always make sure to install the proper protection devices alongside the GDT.

In conclusion, the 2027-25-SMLF GDT is an effective solution for protecting power lines and other equipment from damaging voltages. With its small size and high voltage rating, the GDT is a popular choice for many applications, and is an essential part of any modern power system. To ensure the best protection for your power lines, it is important to properly install the device and use other forms of surge protection alongside it.

The specific data is subject to PDF, and the above content is for reference