2027-30-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are transient voltage suppression or decoupling devices used in the electrical power system for protection against transient overvoltages. The main component of GDT is a gas-filled tube with two electrodes, an anode and a cathode, connected to a spark gap. The spark gap triggers the switch-over when the voltage reaches the specified level and causes a short-circuit, thus reducing the energy of the wave.

The 2027-30-C GDT is a three-electrode type arrester designed for medium-voltage applications. It is capable of suppressing voltage transients from the source, and can act as a decoupling device between the two components of the power system. The three electrodes are the anode, the cathode, and the spark gap. The spark gap provides a spark to initiate the dimmer switch, which then switches over and shorts the circuit path in order to reduce the voltage.

The 2027-30-C GDT arrester has two modes of operation, "normal mode" and "reset mode." In normal mode, the spark gap will trigger an arrester switch-over whenever the voltage reaches a certain level. In reset mode, the spark gap will open the switch and restore the voltage back to its nominal level. This prevents any permanent damage to the system that could result from a transient overvoltage.

The 2027-30-C GDT arrester can be used in a wide range of applications, from high-voltage power transmission and distribution systems, to industrial and telecommunication systems. In industrial applications, GDT arresters are used to protect equipment from damage caused by short circuit transients. In telecommunication systems, prison breaker arresters are used to protect communication signals from being damaged by high-voltage transients.

GDT arresters are also used in combination with other high-voltage components, such as fuses and high-voltage cables. They can be used in order to reduce the transmission losses caused by long cables, by providing a short transmission path. They can also be used to protect sensitive components from overvoltages and transients.

The 2027-30-C GDT arrester is an efficient and reliable method of transient voltage suppression. It allows for maximum protection of sensitive components and has been proven to be effective in suppressing and preventing overvoltage transients.

The specific data is subject to PDF, and the above content is for reference