250LEX4.7MEFC8X9

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in power electronics, home appliances and other electronic systems due to its low cost, large capacitance and strong adaptability. The 250LEX 4.7MEFC8X9 aluminum electrolytic capacitor is a non-polarized device with a capacitance of 4.7 microfarads, at a voltage range of 250 volts. This device has an encased aluminum body and a printed circuit board (PCB) lead out. It is an ideal solution for applications that require high current output, such as solar panel regulators, automotive electronics, and high-performance audio systems.

The basic structure of the 250LEX 4.7MEFC8X9 aluminum electrolytic capacitor consists of three parts, the anode foil, the dielectric oxide film, and the cathode foil. The anode foil consists of an anode plate and an electrolyte layer. The electrolyte layer consists of a solution of alcohol, acid, and water which acts as an ionic conductor. The anode plate is usually made of aluminum foil and forms a two-dimensional surface for the deposition of metal oxide. The dielectric oxide film is formed on the anode foil by applying an electric current, in order to facilitate the transfer of electrical charge. Finally, a metalized cathode foil, typically aluminum or tin, is attached to the dielectric oxide film to form a capacitor.

The working principle of the 250LEX 4.7MEFC8X9 aluminum electrolytic capacitor is relatively simple, yet very effective. When a voltage is applied across the anode and cathode foil, a charge builds up between them. This charge is stored in the dielectric oxide film and is released when the voltage is removed. The dielectric oxide film acts as a dielectric, allowing for the storage of electrical energy and the release of electrical energy with a minimal amount of power loss. This type of capacitor is often used for applications that require high currents, such as inductive load switching, power supplies, and motor control.

In conclusion, the 250LEX 4.7MEFC8X9 aluminum electrolytic capacitors are a cost-effective and reliable solution for applications that require high current output. It consists of three basic components, namely the anode foil, the dielectric oxide film, and the cathode foil. The working principle is based on the storage and release of electrical energy within the dielectric oxide film. This capacitor is an ideal choice for applications such as solar panel regulators, automotive electronics, and high-performance audio systems.

The specific data is subject to PDF, and the above content is for reference