2N4914

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N4914 is a type of bipolar junction transistor (BJT) and belongs to the family of single transistors. It is a silicon NPN device designed for switching, oscillator, amplifier and level-shifter applications at frequencies of up to 100kHz.

The transistor is configured as a three-terminal device with a base, collector and emitter. The collector and emitter of the transistor are connected together in order to provide an electric connection between the two terminals. The base of the transistor then acts as a control point which allows current to flow through the device.

The 2N4914 has a maximum current gain of 50, meaning it can amplify an input signal with a current gain of up to 50. This is a relatively high current gain which is suitable for amplifying higher-level signals.

The working principle of the 2N4914 is based on the process of a small current applied to the base terminal regulating the larger current flowing through the collector and emitter. This is known as the input-output relationship. When a positive voltage is applied to the base, a small current flows through it and the larger current flows through the collector, creating an amplified output signal.

The 2N4914 is most often used in switching, oscillator, amplifier and level-shifter applications. It can be used in a wide range of applications such as motor control, switching power supplies, audio amplifiers, interface circuit design and temperature sensing. As the operating frequency of the device can be up to 100kHz, it can be used in higher frequency applications such as radio-frequency signals and digital-to-analog conversions.

The 2N4914 is also commonly used in high-speed logic and operational amplifier circuits. Because of its high current gain, it can be used to amplify high-speed logic signals and drive high-speed operational amplifiers. The device has low input and output offset voltage, meaning it can provide accurate output signals.

The 2N4914 has a wide range of applications in various industries and is a reliable and cost-effective solution for a variety of circuits. With its high current gain and low offset voltage, it is ideal for use in high-speed circuits. As it is suitable for up to 100kHz, it can also be used in higher frequency applications such as radio-frequency signals and digital-to-analog conversions.

The specific data is subject to PDF, and the above content is for reference