2N5384

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transistors - Bipolar (BJT) - Single

The 2N5384 is a single bipolar junction transistor (BJT) designed and manufactured by ON Semiconductor. The device is typically comprised of a semiconductor material base and two separate electrodes connected to the base. It is primarily used for switching and amplifying applications.

Application Field: The 2N5384 BJT is mostly used for general-purpose switching and amplifying applications because of its excellent power handling capacity, low noise, and low leakage current. The device is suitable for operations in a wide range of frequencies, and can be used for radio-frequency (RF) amplifiers and switching circuits. These BJTs are also popular for use in small-signal amplification, audio mixing, and other applications requiring low noise and low distortion.

Working Principle: BJT operation is based on the principle of carrier injection and transistors. Basically, an applied voltage to the base of the transistor will cause a current to flow through the base and control the flow of carriers between the emitter and collector. The amount of carriers flowing between the two electrodes will depend on the voltage level applied to the base.

The operation of a BJT can be tuned to switch on and off according to the applied voltage level. When the voltage level is below the threshold level of the transistor, the device will remain in its off state. When the applied voltage level exceeds the threshold level, the transistor will become forward-biased and turn on, allowing current to flow from the collector to the emitter. When a reverse voltage is applied to the device, the transistor will become reverse-biased and turn off.

Typically, a BJT can have both positive and negative bias; this is referred to as its bi-polar operation. When an application requires higher voltage level or power handling capacity than a single BJT can provide, several transistors can be connected in series or parallel configuration to increase the current flow or voltage handling capacity of the device.

The 2N5384 device is one of the most popular single BJTs used in audio amplifiers and other general applications. It has excellent current handling capacity and low voltage drop. The device can operate up to frequencies as high as 250 kHz, which makes it suitable for RF amplifiers as well. Furthermore, it has low noise and excellent power-handling capacity, making it one of the best BJTs for audio applications.

The specific data is subject to PDF, and the above content is for reference