2PD602ASL,235

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2PD602ASL,235 transistor is a field effect transistor from the single bipolar junction transistor (BJT) category. This component is often used in embedded applications where high input impedance is desired. It is an NPN transistor, which means it uses negative-type charge carriers.

The device is fabricated using a combination of silicon and germanium as the base material. This combination serves to provide both enhanced speed and power compared to traditional BJT devices. The high switching speeds of the bipolar junction transistor allow it to be used in a variety of applications.

The 2PD602ASL,235 transistor has a breakdown voltage between collector and base of 5V, and between the collector and emitter of 30V. The turn-on voltage is 4V, the moveable range of current is 2.4mA, and the maximum testing current an average of 80mA. The device features an average enable time of 2.4µs, an average disable time of 3.2µs, and a maximum switching time of 4.0µs. When used in digital applications, the 2PD602ASL,235 transistor can operate at frequencies up to 300MHz.

The most common application for transistors such as the 2PD602ASL,235 is as an amplifier. It is usually used to increase the gain of the signal being amplified. This can be done by using a two-stage amplifier with the transistor used in one of the stages. It can also be used to amplify high-frequency signals in circuits, such as radio receivers and TV receivers. The 2PD602ASL,235 can also be used to provide switching and signal conditioning between analog and digital signals.

The working principle of a bipolar junction transistor is based on the use of two p-type and two n-type semiconductor regions. When a voltage is applied to the base, it creates a current that is proportional to the applied voltage. This current consists of both hole and electron carriers and is referred to as the base current. The base current then controls the flow of current between the collector and the emitter. Depending on the voltage applied to the base, the transistor can either be turned on or off.

In summary, the 2PD602ASL,235 is a single bipolar junction transistor, which has a variety of applications including amplification and signal conditioning. It has a maximum testing current of 80mA, a breakdown voltage between collector and emitter of 30V, and a maximum switching time of 4.0µs. The working principle of the device involves a two-stage amplifier, with the transistor controlling the flow of current between the collector and the emitter depending on the voltage applied to the base.

The specific data is subject to PDF, and the above content is for reference