35PK680M10X16

Series:	PK
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Capacitance:	680µF
Tolerance:	±20%
Voltage - Rated:	35V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	910mA @ 120Hz
Ripple Current @ High Frequency:	1.092A @ 10kHz
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.689" (17.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are the most commonly used type of capacitor because of their high surface area efficiency, a combination of size and energy density, and cost effective production process. The specific type of capacitor described in this article is the 35PK680M10X16. This particular capacitor has a 6.3mm diameter, 680µF capacitance, 10VDC working voltage, and is rated for 16V.Aluminum electrolytic capacitors are made from two aluminum foils and a paper separator. The anode side is a punched aluminum foil that is sprayed with a different coating, which increases its surface area. The aluminum foil is then etched in order to create microscopic holes, which act as the anode. The cathode side is an aluminum foil that is can be rolled or sprayed with a different coating, which is more conducting than the anode side. This provides a higher seating voltage for a lower ESR (Equivalent Series Resistance).The paper separator keeps the two aluminum foils separated and prohibits any direct contact between them. The capacitance of the capacitor is determined by the area of contact between the two aluminum foils and the thickness of the paper separator. The capacitance of the 35PK680M10X16 capacitor is 680µF. The working voltage is referred to as the rated voltage, which is 10VDC for this particular capacitor.The main purpose of the aluminum electrolytic capacitor is to store and supply the energy used in an electrical circuit. It acts as a passive component by accumulating and discharging electricity as needed. The capacitor is also used to filter or regulate current, and to reduce power loss in an electrical circuit by limiting current surges.In applications such as power supplies or amplifiers, the aluminum electrolytic capacitor can provide charge to the circuit even when the source is not active. When the capacitor is connected in an active circuit, it functions as a filter by preventing high-frequency transients from being transmitted through the power supply rails.Additionally, aluminum electrolytic capacitors can be used in other applications such as power factor correction, line filter, and motor control, as well as for voltage smoothing or in switching power supplies. They can also be used as a source of energy in some applications.The life of the aluminum electrolytic capacitor is determined by the voltage stress, temperature, and the ESR (Equivalent Series Resistance). High values of each factor can reduce the expected life of the capacitor. The life expectancy of the capacitor is calculated in terms of the number of hours it can operate at its maximum rated voltage and temperature before it reaches the end of its useful life.In conclusion, the 35PK680M10X16 aluminum electrolytic capacitor is used in many applications that require a combination of size and energy density along with a cost effective production process. Its main function is to store and supply energy, filter or regulate current, and reduce power loss in an electrical circuit. The life expectancy of the capacitor is determined by the voltage stress, temperature, and the ESR.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description