35PK680MEFC10X16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most common types of capacitors found in the industrial and consumer electronics market. The 35PK680MEFC10X16 is one such capacitor and is designed for a wide range of applications. This article will discuss the applications and working principles of this specific type of capacitor.

The 35PK680MEFC10X16 is a mid-range electrolytic capacitor designed for medium-power circuit applications. It has a valve design that corresponds to a temperature range of -55°C to +125°C, making it suitable for most general-purpose applications. The cap is rated for a rated voltage of at least 350V, with a life expectancy of 2000 hours at a rated voltage of 450V. The capacitance value is 680 µF, which is quite a high value for an electrolytic capacitor of this size.

The 35PK680MEFC10X16 has a wide range of applications, including power back-up systems, motor controllers, power supply circuits, and motor regulator circuits. Its high value makes it particularly suitable for use in power supply circuits, as it can store a large amount of electricity. The cap is also used in audio amplifier circuits, as its large capacitance helps increase the amp’s power output. The cap is also used in high-frequency circuits, as it helps stabilize the voltage in these circuits.

The 35PK680MEFC10X16 does not require any special installation or maintenance. They are usually pre-filled with electrolyte, sealed, and then epoxy-coated for protection. The capacitors are typically installed as close as possible to the point of use, as this improves their efficiency and provides better protection from electrical noise.

The working principle of an electrolytic capacitor is quite simple. The capacitor consists of two electrodes, an anode and a cathode, separated by an electrolyte. When a voltage is applied to the electrodes, the electrolyte molecules form an electric field between the two and act as a separation medium. This electric field acts as a resistor to current flow, storing electrical energy. The capacitance of the capacitor is determined by the size of the electrodes, the dielectric constant of the electrolyte, and the distance between the two electrodes.

Overall, the 35PK680MEFC10X16 is a versatile and cost-effective aluminum electrolytic capacitor that can be used in a wide range of circuits. Its high value makes it a suitable choice for power supply circuits and audio amplifier circuits, while its low voltage rating makes it ideal for high-frequency applications. The capacitor is easy to install and maintain, making it a desirable choice for many different applications.

The specific data is subject to PDF, and the above content is for reference