400SXG100MEFCSN25X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminium Electrolytic Capacitors are electronic components that are mainly used for providing electrical capacitance in a wide variety of applications, ranging from small consumer electronics to industrial power systems. They can provide a relatively constant capacitance over a wide range of frequencies, typically from 20 Hz to 100 kHz, and are usually limited by the quality of the dielectric. In the case of the 400SXG100MEFCSN25X25, its application field and working principle make it one of the most widely used aluminium electrolytic capacitors.

The 400SXG100MEFCSN25X25 is an electrolytic capacitor with a design rating of 100V-500mA. It is a radial, non-snap-in capacitor with lead-free terminals. This capacitor is designed specifically for use in low frequency AC circuits, such as audio filtering, power supply smoothing, and dc-dc buck converters. The 100V rating allows it to be used in a wide array of applications and makes it suitable for a variety of switching frequencies. It also has a very low ESR (equivalent series resistance) which gives it excellent low-frequency response.

The 400SXG100MEFCSN25X25 aluminum electrolytic capacitor operates on the principle of electrolysis. The capacitor is formed by two electrically conductive plates, separated by an insulating dielectric layer. The plates are connected by an electrolyte, which acts as the medium for the transfer of electrons between the two plates. The amount of capacitance provided by the capacitor is directly proportional to the surface area of the plates, and the thickness of the dielectric layer.

The 400SXG100MEFCSN25X25 capacitor is designed to reduce ESR, which helps to improve accuracy in digital circuits. A low ESR allows for better signal to noise ratios, and improved power efficiency. The capacitor also has a higher tolerable ripple current, allowing it to safely handle more power. This makes it suitable for use in higher power applications.

The 400SXG100MEFCSN25X25 is also designed to provide a higher temperature stability than conventional aluminum electrolytic capacitors. It has an operating temperature range of -25°C to 70°C, which is much greater than the typical operating temperature of -10°C to 85°C for conventional electrolytic capacitors. This allows the capacitor to be used in tight quarters, as well as in harsher environments.

In addition to its increased temperature stability, the 400SXG100MEFCSN25X25 also has a very long shelf life, with a guaranteed minimum of 2000 hours. This means that it can provide a reliable long-term performance. Unlike conventional aluminum electrolytic capacitors, the 400SXG100MEFCSN25X25 does not suffer from a decrease in performance after many years of use.

The 400SXG100MEFCSN25X25 is one of the best aluminum electrolytic capacitors on the market, and is suitable for a variety of applications. Its higher temperature stability, low ESR, and long shelf life make it one of the most reliable, and cost effective, capacitors available. As such, it is one of the most widely used aluminum electrolytic capacitors in the market.

The specific data is subject to PDF, and the above content is for reference