420BXW39MEFR16X20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are commonly used in a wide array of electronic applications. The most common type of capacitor is the 420BXW39MEFR16X20, which is a radial leaded capacitor with anode, cathode and dielectric composition of aluminum foil, and electrolyte.

The 420BXW39MEFR16X20 features a high capacitance and a low impedance in direct current applications due to its superior dielectric properties. It is also highly stable under temperature and voltage fluctuations, has low leakage current, and is non-polar. As such, it is an ideal choice for use in automotive, industrial, and consumer electronics applications, such as audio video devices, digital converters, radio communications, digital control systems, and signal processing.

The principle of the aluminum electrolytic capacitor is that is uses an etching process on the anode and cathode foil of the device. The etching process oxidizes the aluminum to create a thin oxide layer on the surface. This oxide layer acts as a dielectric material, enabling the capacitor to store and discharge electrical energy.

The 420BXW39MEFR16X20 has anodic and cathodic leads which connect to the aluminum foil. When voltage is applied, the aluminum oxide layer on these leads is polarized, creating a dipole field with opposite electric charges, and enabling the capacitor to store energy. As current is discharged from the capacitor, the electric dipole field is lost and the device output voltage is lowered due to the charge leakage.

The 420BXW39MEFR16X20 performs best at frequencies below 1MHz, and is optimized for low-impedance applications in direct current mode. However, it is also suitable for use in alternating current applications, provided that the ripple currents are kept low. Due to its low impedance, low leakage current, and high capacitance, it is widely used in a number of applications ranging from time-delay to energy storage.

For energy storage applications, the capacitor is connected in series with another inductive device, such as a resistor or an inductor. The inductor acts as a "repeater" to the system, repeatedly charging and discharging the capacitor. This ensures that there is enough charge stored in the capacitor to power the system at all times.

The 420BXW39MEFR16X20 is also used in other applications such as voltage stabilization, frequency response shaping, phase shift compensation, and energy-efficient lighting. Its low impedance and large capacitance also make it a good choice for energy storage applications, such as energy conservation in solar power systems.

Due to its versatility and robustness, the 420BXW39MEFR16X20 aluminum electrolytic capacitor is a common choice for many applications, and is widely used in a wide variety of electronics systems. Its ability to perform at low frequencies, high temperatures, and low Impedances make it an ideal choice for applications ranging from automotive to consumer electronics.

The specific data is subject to PDF, and the above content is for reference