420BXW82MEFC18X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, also referred to as electrolytic capacitors, are widely used in a variety of electronic circuits. They are capacitors containing an electrolyte, typically a solution composed of water and an acid. These capacitors are usually made of aluminum foils, with aluminum oxide acting as the dielectric.

The 420BXW82MEFC18X25, also known as a radial lead capacitor, is a type of aluminum electrolytic capacitor. It consists of a cylindrical aluminum case, and two radial leads that allow it to be connected to other components in a circuit.

The aluminum wires inside the capacitor are separated by a thin layer of aluminum oxide, which acts as the dielectric. This layer allows for a very high dielectric strength between the two conductive surfaces. The capacitance of the 420BXW82MEFC18X25 depends on the thickness of the aluminum oxide layer, as well as the diameter and length of the capacitor. The capacitance will increase with an increase in size and a decrease in thickness.

These capacitors find a variety of applications in both consumer and industrial electronics. These applications mostly involve filtering, buffering, and power designs. In the case of filtering, these capacitors can be used to remove unwanted noise, or to separate high frequency signals from low frequency signals, allowing only the desired frequencies to pass through. In the case of buffering, they can be used to provide a stable output voltage, regardless of the input voltage. Finally, in the case of power designs, they can be used to store energy and then release it when needed.

These capacitors are also used in audio circuits, for applications such as decoupling, coupling, and power amplifiers. Decoupling capacitors are used to filter the signal to prevent the power supply from interfering with the signal. Coupling capacitors are then used to allow only the desired frequencies to pass through. Finally, power amplifiers require capacitors with high capacitance in order to store the energy needed for the amplifier to drive the speakers.

Aluminum electrolytic capacitors are also commonly used in switching power supplies, which require a stable output voltage regardless of the input voltage. These capacitors are used to “store” the energy that is needed by the power supply to switch between different voltage levels. They are also used to filter out any noise and stabilize the voltage output.

The 420BXW82MEFC18X25 aluminum electrolytic capacitor has a wide range of applications, from filtering to power designs. Its high capacitance and dielectric strength make it an ideal choice for a variety of circuits. With its radial lead design, it is easy to connect to other components in a circuit, allowing it to be used in a variety of designs.

The specific data is subject to PDF, and the above content is for reference