63VXG1200MEFC22X25

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	0.866" Dia (22.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	1.3455A @ 10kHz
Ripple Current @ Low Frequency:	1.17A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	VXG
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	5000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	63V
Tolerance:	±20%
Capacitance:	1200µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are an important type of electric component used in almost all types of electronic devices. They are used in devices such as computers, cell phones, TVs and even large electrical power systems. While they come in many different shapes and sizes, they all work on the same fundamental principle. This article will focus on the 63VXG1200MEFC22X25 aluminum electrolytic capacitor and discuss its application field and working principle.

Application Field

Aluminum electrolytic capacitors are one of the most widely used capacitors around the world. They are used in many different applications where a relatively large capacitance with a small size is required. Common applications include filtering and smoothing supply voltages, signal buffering and noise suppression, switching/rectification circuits, and motor control circuits. The 63VXG1200MEFC22X25 aluminum electrolytic capacitor is an especially versatile capacitor as it is rated for voltages up to 63 volts and can hold a large capacitance of 1200μF (microfarads). This makes it a great choice for a variety of different applications where a large capacitance with a high operating voltage is needed.

Working Principle

At its most basic level, an electrolytic capacitor consists of two aluminum foil sheets with a thin layer of oxide on the surface (the dielectric material). This oxide layer is formed when the two foil sheets are passed through a bath of electrolyte. This process creates a thin layer of electron-rich film on one of the aluminum sheets and a thin layer of electron-poor film on the other. The two layers will then naturally create a voltage potential between them, making the capacitor polarized. When a voltage potential is applied to the capacitor, current is able to move through the oxide layer from one aluminum sheet to the other, allowing the capacitor to store electrical energy.The 63VXG1200MEFC22X25 aluminum electrolytic capacitor has a maximum working voltage of 63 volts, meaning it can handle voltages up to 63 volts without shorting or damaging the capacitor. This makes it a great choice for applications where a higher working voltage is needed, such as motor control circuits or switching/rectification circuits.

Conclusion

The 63VXG1200MEFC22X25 aluminum electrolytic capacitor is a great choice for applications where a higher operating voltage and a large capacitance are needed. It is a versatile capacitor that can be used in a variety of different applications such as filtering and smoothing supply voltages, signal buffering and noise suppression, and motor control circuits. The working principle of an aluminum electrolytic capacitor is fairly simple; two aluminum foil sheets are passed through a bath of electrolyte, creating a thin layer of oxide between them and allowing them to store electrical energy when a voltage is applied.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description