ADG509FBRNZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG509FBRNZ is an integrated circuit (IC) switch, manufactured in a plastic small outline package by Analog Devices. It is a CMOS switch capable of handling signals of up to 10V. The ADG509FBRNZ can handle a differential voltage of ±20V for AC-coupled and DC-coupled inputs, with a guaranteed on resistance of 1.5Ω and a wide variety of functions to suit a number of needs. It is also offered with a low on resistance of 0.5Ω and rounded edges on the package. The ADG509FBRNZ is available in a variety of logic functions, making it a versatile device for many applications.

The ADG509FBRNZ is classified as an interface between analog and digital components. It is one of a few integrated circuits (IC) switches commonly found in the market today. It is typically used in a circuit to provide off-on control of signals, such as in analog multiplexers, demultiplexers, and other functions. Additionally, it is also suitable for many interface applications, such as for data acquisition systems, instrumentation control, and low-level signal switching. In these applications, the ADG509FBRNZ can provide efficient signal routing and protection from overvoltage spikes or ESD.

The ADG509FBRNZ is designed to work in an analog-to-digital converter or digital-to-analog converter, depending on the application. An analog switch is used to select inputs for a digital-to-analog converter, or outputs for an analog-to-digital converter, allowing signals to be converted between formats. A multiplexer/demultiplexer circuits combines several input signals into one or splits one signal into several outputs. Demultiplexers are also often used to decode address or data signals, while a multiplexer can be used to combine signals from different sources and enable them to be routed appropriately. Finally, a demultiplexer can also be used to drive an LED display.

When using the ADG509FBRNZ, the logic signal is provided by the user (microcontroller, logic gate, flip-flop, etc.) and is sent to the switch. The logic signal is then used to control the signal being switched from the input side to the output side. The digital signal is typically used to control the switching state of the switch by applying a signal to the digital control lines of the switch. The digital control signal used by the ADG509FBRNZ is usually applied to the device via the digital input pins. When the device is in the appropriate logic high or low state, the NC or NO pins will be connected accordingly. The device will then connect the corresponding signal from its input side to the output side. This allows the user to route signals from the input side (analog or digital) to the output side.

The ADG509FBRNZ is also designed to effect a number of types of protection. It incorporates internal ESD protection diodes, which protect the device in the event of an electrostatic discharge. In addition, the device is capable of handling a differential voltage of ±20V for AC-coupled and DC-coupled inputs. This allows the device to protect against overvoltage or ground looping, when the output voltage is higher than the input voltage.

In summary, the ADG509FBRNZ is an integrated circuit switch available in a variety of logic functions, consisting of analog switches, multiplexers, demultiplexers, and other interface applications. It is capable of handling signals of up to 10V with a guaranteed on resistance of 1.5Ω (or 0.5Ω with the round option) and a differential voltage of ±20V. Furthermore, the device includes internal ESD protection diodes, as well as overvoltage and ground loop protection, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference