ADG5212BRUZ-RL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG5212BRUZ-RL7 is an integrated circuit from Analog Devices, Inc., mainly forming part of the interface between analog and digital signals. This particular model is best classified as an analog switch, multiplexer, and demultiplexer.

Analog switches, multiplexers, and demultiplexers are all devices which allow multiple signals to pass through a single signal. In other words, they are made to address the issue of “pipeline overcrowding”, that is, the need to reduce the number of signal paths due to a limited amount of space. In the case of the ADG5212BRUZ-RL7, it is designed to switch voltage signals, which are necessary to move information from one point to another.

The ADG5212BRUZ-RL7 provides a ­high-speed, low-power solution for data switching applications, featuring low propagation delay, low source and sink current, and low power dissipation. It has a low on-resistance ratio and low quiescent current, allowing for higher switching speeds. It features differential gain error of 0.2 % and a maximum on-resistance of 350 ohms. Furthermore, the ADG5212BRUZ-RL7 features a slew rate of 2 V/µs with ±5 V supplies. It also includes a wide range of operating temperature, from –40°C to 85°C.

As far as usage, the ADG5212BRUZ-RL7 is used in a variety of applications, such as digital input and output switching, analog signal switching, ATE equipment and modem applications. In these applications, it is used to switch signals without compromising signal integrity.

As for the working principle of the ADG5212BRUZ-RL7, the device works by utilizing a CMOS process to switch signals from one path to another. The device has two inputs, which are connected to the external circuitry and to each other, and a single output connected to the external circuitry. When a voltage is applied to the control terminal, it causes a switch to close and the current flow will move from the input to the output port. When the control terminal is not activated, no current flow will occur. The ADG5212BRUZ-RL7 is designed to handle a wide range of voltage signals and can switch up to 40 volts of input.

In conclusion, the ADG5212BRUZ-RL7 is a low-cost, low-power analog switch, multiplexer, and demultiplexer designed to address the need for multiple signals to pass through a single signal path. It is ideal for digital input and output switching, analog signal switching, ATE equipment, and modem applications, and features low propagation delay, low source and sink current, and low power dissipation.

The specific data is subject to PDF, and the above content is for reference