ADG774BRZ-REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interfacing is an architecture and technology used in electronic circuits or systems that guide how sub-systems interact. An interface can be a physical boundary, like a circuit board, or it can be a connection formed between two systems for communication, such as a software interface. In this article, we will discuss the application field and working principles of the ADG774BRZ-REEL interface – an analogue switch, multiplexer, and demultiplexer.

Analogue switches, multiplexers and demultiplexers play an important role in the world of interfaces. Analogue switches are electronic components which are used to turn a signal on and off. Multiplexers are devices that allow multiple digital signals to be transmitted over a single line by switching between each of the incoming signals. Demultiplexers, on the other hand, are the opposite of multiplexers, allowing a single-line incoming signal to be broken up into multiple output signals. The ADG774BRZ-REEL is a switch, multiplexer, and demultiplexer designed for ultra-low power and very low voltage operation, making it ideal for a variety of applications.

The ADG774BRZ-REEL is fully CMOS compatible and is available in three packages: SOIC-8, MSOP-10, and TSSOP-14. The device features an enable/disable control input for shutting down the entire device, and each channel does not require an external pull-up resistor to keep it in an enabled or disabled state. It has a low on-resistance of 10 ohms and can handle up to +12V and -12V of voltage at its inputs and outputs. The device is also ESD tolerant up to 2 kV.

The ADG774BRZ-REEL is designed for power-sensitive applications and is ideal for use in battery-powered devices and wireless communications systems. The device has a low power consumption of 80µA at a supply voltage of 5V, making it ideal for low-power applications. It is used in a variety of applications such as computer peripherals, automotive, industrial, and medical devices. The device can be used in various applications such as muxing, switching, analog-to-digital conversion, digital-to-analog conversion, and general data routing. It is also used to provide non-monotonic switching and multiplexing of digital signals.

The ADG774BRZ-REEL\'s working principle is based on its ability to control the voltage at its outputs. It has two input pins, IN1 and IN2, which can be connected to a logic signal (e.g. high or low). When the logic signal connected to IN1 is high, the output pins are driven to their maximum voltage, while the logic signal connected to IN2 causes the output pins to be driven to their minimum voltage. The ADG774BRZ-REEL also has an enable input which can be used to turn off the device when it is not required.

In conclusion, the ADG774BRZ-REEL is an ideal device for a variety of applications due to its extremely low power consumption and its compatibility with CMOS logic. With its two input pins and enable input, it can be used for a wide range of analogue signal switching, multiplexing and demultiplexing applications. Its low on-resistance and ESD tolerance make it a great choice for use in power-sensitive and robust applications.

The specific data is subject to PDF, and the above content is for reference