ADIS16497-1BMLZ

Series:	iMEMS®
Part Status:	Active
Sensor Type:	Accelerometer, Gyroscope, 6 Axis
Output Type:	SPI
Operating Temperature:	-40°C ~ 105°C
Base Part Number:	ADIS16497

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The ADIS16497-1BMLZ is a motion sensor designed for inertial measurement unit (IMU) applications. Inertial measurement unit, commonly referred to as an IMU, is a combination of sensors typically including angular rate (gyro) sensors and acceleration sensors, used to track motion and orientation. This device combines the angular rate and acceleration measurements into a single device, providing a more accurate and independent measurement of motion.ADIS16497-1BMLZ Application Field
The ADIS16497-1BMLZ has a range of applications within the motion sensing and imu field. The device is used in a variety of applications such as vehicle stabilization, unmanned vehicle use, and robotics. In these applications, an accurate and comprehensive measurement of motion is necessary to ensure that the system can operate properly and safely.The device’s angular rate and acceleration sensing capabilities are specifically designed to provide an ideal solution for vehicle stabilization applications. The device is able to accurately measure the angular rate of the vehicle and the acceleration caused by the movement of the vehicle. This ensures that the system can adjust the vehicles position and stabilize it according to the driving conditions.ADIS16497-1bmlz Working Principle
The working principle of the ADIS16497-1BMLZ relies on the same technology as most other IMUs. The device uses a combination of gyroscope and accelerometer sensors to measure angular rate and acceleration, respectively. The device is composed of a set of three gyroscope modules and three acceleration modules that are arranged in orthogonal orientations. This arrangement allows the device to capture the angular rate and acceleration measurements from all directions, allowing it to accurately and precisely measure the motion of the object it is attached to.In order to ensure accuracy and precision, the device uses multiple calibration algorithms and a dedicated temperature monitoring system. The first calibration algorithm is the gyroscope calibration that allows the device to measure angular rate in all three axes with a resolution of 0.01 Deg/Sec. The accelerometer calibration is used to calculate the acceleration of the object, allowing it to measure acceleration in all three axes with a resolution of 1 mg. After the calibration process is complete, the temperature measurement system is enabled to ensure the accuracy of the measurements at all times.Conclusion
The ADIS16497-1BMLZ is an inertial motion sensor designed for IMU applications. The device uses gyroscope and accelerometer sensors to measure angular rate and acceleration in all three axes. The device is ideally suited for vehicle stabilization and unmanned vehicle control applications, as it provides accurate and precise measurements of motion and orientation. The device also features a set of sophisticated calibration algorithms and a dedicated temperature monitoring system to ensure the accuracy of the data collected at all times.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description