ATSAMD21J15B-AUT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ATSAMD21J15B-AUT is a popular choice for embedded applications, primarily within the microcontroller family. In this article, we will discuss the application field and working principle of the ATSAMD21J15B-AUT.

Application Field

The ATSAMD21J15B-AUT is a low power, low pin count microcontroller with a 32-bit ARM Cortex-M0+ core. It is designed for applications with minimal memory, power, and performance requirements. The device is ideal for a wide range of consumer and industrial products such as portable electronic devices, control systems, appliances, and electronics.

The ATSAMD21J15B-AUT includes a 32-bit ARM Cortex-M0+ processor running up to 48MHz. It allows access to up to 64KB of flash memory, 16KB of SRAM, and 8KB of ROM. Additionally, it has four peripheral features: I2C, SPI, UART, and ADC. It supports 1-Wire, I²C and SPI communications, on-chip debugging, and an extensive amount of general purpose I/Os, making it an ideal choice for embedded applications.

Working Principle

The ATSAMD21J15B-AUT runs on an ARM Cortex-M0+ core. Its main components include: processor, clock generator and power management peripherals, Inter-Integrated Circuit (I2C) serial bus, controller area network (CAN) facility and serial peripheral interface (SPI) controller.

The ATSAMD21J15B-AUT performs most operations with the ARM Cortex-M0+ core. The core is designed to perform asynchronously, allowing the system to reduce power consumption to a minimum. It runs at a frequency up to 48MHz and executes instructions with a single cycle CPI. It is specially engineered to produce low-power and execute tasks with extremely low latency.

The ATSAMD21J15B-AUT provides on-chip debugging with interfaces such as JTAG and Serial Wire Debug (SWD). This allows the user to connect external debugging hardware to the processor in order to debug and test system performance. It also has the ability to trigger external events to facilitate debugging.

In addition, the ATSAMD21J15B-AUT includes various low-power modes that can save energy when the system is in idle mode. It also supports sleepwalking, a feature that allows the microcontroller to wake itself up from sleep when a specific condition is met.

Another important feature of the ATSAMD21J15B-AUT is the I2C peripheral. I2C is a two-wire communication protocol that allows devices to communicate with each other in a bus-like manner. Its main components are the master, which initiates communication, and the slave, which sends and receives data. The ATSAMD21J15B-AUT also has an analog-to-digital (ADC) converter which is used to convert analog signals into digital signals.

The ATSAMD21J15B-AUT also has a CAN facility that allows different devices to communicate with each other. CAN is divided into two parts: the data link layer and the transport layer. The data link layer handles the physical layer and the CAN protocol. The data link layer uses a fault-tolerant protocol to ensure message integrity and reliability. The transport layer implements the CAN protocol, which facilitates communication between multiple nodes.

Finally, the ATSAMD21J15B-AUT includes an SPI controller. SPI is a four-wire protocol which is widely used in embedded systems. It can transfer data between two SPI devices at high speeds. SPI provides a full-duplex, semi-duplex, or half-duplex mode of communication and can be used for communication between devices on a single board or on multiple boards connected over a serial bus.

To sum up, the ATSAMD21J15B-AUT is ideal for embedded applications due to its low-power, low-pin count design and its wide range of features. With its powerful ARM Cortex-M0+ processor, on-chip debugging, I2C and CAN facilities, and SPI controller, it can reliably and efficiently handle tasks in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference