BA17812FP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BA17812FP is a linear voltage regulator, part of a larger family of voltage regulator designs by Rohm Semiconductor. This type, a "low dropout" (LDO) type, features an output voltage of 3.3V with a maximum current output of 800mA. A LDO type regulator has an input voltage range of 5V to 37V and features an output voltage that is preset and fixed or adjustable and variable. As with other linear voltage regulator designs, they use an internal reference voltage, a comparison circuit, and an active device to generate the desired output voltage.

The reference voltage, compared to the feedback voltage, determines the amount of current flow through the system. The active device in this design, the PNP transistor, uses a difference between the input voltage and the reference voltage to generate the desired output voltage. This type of regulator is referred to as "low dropout" due to the fact that its voltage regulation is less affected by changes in the input voltage than other types of voltage regulators. This makes the BA17812FP highly reliable for applications that require low power consumption, reliable supply, and accuracy.

As with most voltage regulator circuits, the BA17812FP features over-current, over-voltage, and short-circuit protection. To protect against over-current, the output of the regulator is monitored and will shut off if the required current is exceeded. Over-voltage is prevented by monitoring the output voltage and automatically limiting the current if it exceeds the recommended value. For short-circuit protection, the regulator\'s circuit is designed to sense a short-circuit on the output and shut off the supply to prevent damage.

The BA17812FP is designed for use in a variety of applications including portable and stationary devices, audio amplifiers and receivers, and power supplies. In these applications, the circuit is used to step down an input voltage to the level required by the devices, ensuring that the devices receive the power they need without exceeding the rated output voltage. It is also used to isolate the output from the input, allowing for better system protection from reverse transients, noise, and other related issues.

The BA17812FP is also used as a voltage drop regulator, providing a stable output voltage when the input voltage falls below the output\'s preset level. When this happens, the circuit will essentially "drop out" and reduce the output voltage to the preset level, ensuring that the connected device receives the correct output. This type of regulator is often used to protect delicate components from damage that can be caused by excessive voltage or current.

Linear voltage regulators such as the BA17812FP offer a simple and cost-effective solution to controlling the output voltage of a circuit. With a wide variety of applications and reliable performance, this type of general-purpose linear regulator can provide an ideal solution for virtually any voltage conversion requirement. By combining a reference voltage, internal comparator, and active device, a low-dropout type regulator can be deployed for many different applications in which the input voltage is greater than the output voltage.

The specific data is subject to PDF, and the above content is for reference