BAS19-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BAS19-7 diode is a form of electronic component classified as a rectifier and one of the most basic varieties of diode, consisting of a single semiconductor junction. It is designed to avoid the issue of rectification, which is the process by which alternating current (AC) is converted into direct current (DC). This type of diode also acts as a control element, allowing current to pass either forward or backward, depending on the direction of the voltage present.

A BAS19-7 diode\'s structure is formed when two p-n junctions are interconnected back to back, thus forming two interconnected diodes. This combination creates an electronic device that is semiconductive, meaning that it is capable of passing electric current in either direction. The addition of a dielectric between the two junctions increases the junction capacitance, which provides an additional benefit: noise suppression.

The most important characteristic of any diode is the voltage it can withstand without experiencing breakdown, or Zener breakdown, which is the point at which a portion of the current passing through the junction begins to “leak” into the reverse direction. The BAS19-7 diode can handle up to 17 volts before exhibiting this behavior, making it suitable for a variety of applications, most notably high-voltage rectification and noise suppression.

The BAS19-7 diode also has its practical applications in the field of electronics, such as in circuits that require a protective circuit against overvoltage or transients. It can be used to create a voltage clamp in this situation, effectively stabilizing the voltage across a given pathway and preventing the circuit from receiving a voltage amplitude beyond what it can handle. This type of diode is also used as part of a linear voltage regulator, which can be found in many electronic devices.

The BAS19-7 diode also has its uses in communications, as it can be used to attenuate signals of different frequencies in order to reduce noise. Thanks to its low resistance and high current ratings, the BAS19-7 can also be used in a wide range of electronics, from audio amplifiers to switching regulators to even schottky diodes.

In order to understand the working principles of the BAS19-7 better, it is important to take a look at its specific characteristics. The most important factor to consider is the breakdown voltage, which specifies the maximum voltage that can be applied to the diode before breakdown occurs. The voltage rating is usually expressed as Vz, and ranges from 1V to 17V.

Once the diode reaches breakdown, current begins to leak into the reverse direction and the reverse-bias voltage is greatly increased; this is known as Zener breakdown. After Zener breakdown, the current through the diode remains fairly stable, since the Zener voltage remains constant. This enables the BAS19-7 to act as a voltage regulator and provide a steady voltage across its terminals.

The BAS19-7 is one of the most common and versatile diodes available, offering many different applications in electronics. Its ability to withstand high voltages, its low resistance, and its flexible use in linear voltage regulation makes it an ideal choice for a variety of projects and applications. The BAS19-7 is an effective and cost-efficient solution for many electronic circuits.

The specific data is subject to PDF, and the above content is for reference