BAV756DW-7

BAV756DW-7 Application Field and Working Principle

Introduction

The BAV756DW-7 is a dual, low voltage, P-Channel vertical DMOS FET array. This device is designed for low voltage DC and AC applications in the automotive audio and industrial control markets. It is designed to provide a highly reliable and cost effective solution for these markets. The BAV756DW-7 is manufactured in a full range of packages including SOT-23-5, to 4 pin DIP packages.

Application Field

The BAV756DW-7 is designed to be used in the automotive audio and industrial control markets. It can be used in a wide range of applications such as DC-DC buck converters, solenoid and motor control, AC switch/relay drivers, and low-side switching. The BAV756DW-7 can also be used in automotive audio applications including stereo amplifiers, volume and tone control, switching applications, and power MOSFET drivers.

Working Principle:

The BAV756DW-7 is a vertical DMOS array. It consists of two independent P-channel MOSFETs fabricated in a twin vertical DMOS technology. The dual design provides superior characteristics from a single device, allowing for increased flexibility and lower cost. Each MOSFET has its own source pin, gate pin and drain pin. The source pins are connected between the two MOSFETs. The gate is controlled by a single control signal. When the gate drive is low, both MOSFETs are off and no current flows through the device. When the gate drive is high, the two MOSFETs are on and current is allowed to pass. The gate drive must be at least 3.3V for the device to operate. The drain may be connected to a load or driver circuit.

Conclusion

The BAV756DW-7 is a dual, low voltage, P-Channel vertical DMOS FET array designed for low voltage DC and AC applications in the automotive audio and industrial control markets. It is designed to provide a highly reliable and cost effective solution for these markets. The device offers a wide range of applications including DC-DC converters, solenoid and motor control, AC switch/relay drivers, and low-side switching. It is manufactured in a range of packages including SOT-23-5 and 4 pin DIP packages.