BC184L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BC184L is a low-power, small-signal, NPN silicon transistor. It belongs to a series of dual-gate transistors consisting of three leads that are connected by two gates. This transistor was first released in the early 1970s and is still in use today. It is the choice of many engineers, hobbyists and electronics enthusiasts due to its low cost and reliability. Additionally, it allows for a wide range of applications.

The three leads are the collector, base and emitter. The collector acts as the input and the base, as the intermediary connection between it and the emitter serves as the output. The base lead, which usually takes the bulk of the current, acts as the control element. This transistor is operated by applying voltage to the collector in order to turn it on. When turned on, the voltage developed across the emitter is determined by the current in the base and the current gain.

BC184L transistors are quite versatile and are used in a wide range of applications. Some of the most common applications include oscillators, amplifiers, and switching regulators. Oscillators are devices used to create repeating waveforms and they can be used to create audio signals and oscillating power supplies. An amplifier is an electronic device used to increase the power of a signal, often times transforming it from a low power signal to one of higher power. A switching regulator is used to convert voltages from one level to another and can be used in power supplies to stabilize output signals, and also for voltage regulation.

Bipolar junction transistors, such as the BC184L, are capable of working in several different configurations. These configurations include the common-emitter configuration, the common-base configuration, and the emitter-follower configuration. In the common-emitter configuration, the signals are transferred from a primary to a secondary coil. The signal is amplified by the transistor, which is controlled by the base current. The emitter-follower configuration also involves amplifying signals, however the signals are not necessarily being transferred from a primary to a secondary coil. Instead, the signal is amplified directly. The common-base configuration offers the least output and is used in strictly voltage amplification applications.

BC184L transistors are used in many devices and are often the choice of hobbyists and engineers due to their low cost and reliability. They can be used in a variety of different configurations in order to amplify and switch signals. This makes them quite versatile and allows for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference