BC807-40W RFG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BC807-40W RFG Application Field and Working Principle

The BC807-40W RFG is an NPN silicon general-purpose transistor that is particularly suited for basic audio output applications. It also finds use in a variety of other applications. The RFG in the prefix stands for rugged ferrite gate, and the device has been designed to provide greater protection from the effects of electrostatic discharge (ESD) when used in higher-reliability systems.

It was developed to supply improved ESD protection against fast transients when used in medium power applications like audio amplifiers and tuned circuits. It was also designed to have greater stability when heating up, which makes it better suited to applications with changing power levels and to survive in high-temperature environments.

Characteristics of the BC807-40W RFG

• It has a maximum current rating of 600mA.
• It has a voltage rating of 25V with a collector dissipation of 500mW.
• It has a small signal current transfer ratio (h_fe) of 200.
• It has a collector-emitter breakdown voltage of 40V.
• It has a low input capacitance and leakage current.

Typical Applications of the BC807-40W RFG

The BC807-40W RFG finds use in audio amplifier circuits, such as the push-pull output stages of transistor amplifiers and the power amplifier stages of direct sound input equipment. It is also suitable for use in a variety of other applications, such as:

• Resonance circuits
• Clapping circuits
• Charging and discharging circuits
• High frequency oscillator circuits
• Digital logic circuits
• Low-noise amplifier circuits
• Low cost amplifier circuits

Pinouts of the BC807-40W RFG

The BC807-40W RFG consists of three pins, which are numbered from 1 to 3 from left to right. Pin 1 is the collector, pin 2 is the base, and pin 3 is the emitter when facing the flat side of the transistor with the wide top showing.

BC807-40W RFG Working Principle

The BC807-40W RFG is an NPN type bipolar junction transistor (BJT) or semiconductor device, and it operates by using the movement of electrons from one region to another in a semiconductor material. This movement of electrons is caused by the variation of voltage across the transistor\'s three terminals, known as the Base-Emitter-Collector (BEC) terminals.

When the base voltage of the transistor becomes more positive relative to the emitter voltage, a voltage difference across the Base-Emitter junction is created, thus reducing the barrier between the two layers and allowing current to flow from the base to the emitter. At the same time, this causes current to flow from the collector to the emitter, as the collector voltage is greater than the emitter voltage.

This mechanism of conduction is known as the electrons flowing the base, following the electric field and arriving at the emitter. Since the voltage difference between the collector and the emitter is large, the current flowing through the emitter is much larger than the current flowing through the base, and this is known as the current gain of the transistor.

The large current gain of the transistor is what makes it useful in applications like audio amplifiers. In addition, it can be used to switch other electrical components on and off, if the correct type and polarity of power supply is connected to the Base-Emitter-Collector terminals.

Advantages of the BC807-40W RFG

• The increased stability when the device is heated and in power mode makes it suitable for high-reliability systems.
• It can withstand high temperature environments.
• It has improved ESD protection against fast transients compared to other transistors.
• It has a low input capacitance and leakage current.
• It has a wide range of uses, from audio amplifier circuits to logic circuits.

Conclusion

Overall, the BC807-40W RFG is an NPN type bipolar junction transistor designed to provide greater ESD protection and improved stability when used in higher-reliability systems. It is commonly used in audio amplifier circuits and other applications, and has a wide range of advantages. It is a versatile and reliable device, and can be used in a variety of applications with good results.

The specific data is subject to PDF, and the above content is for reference