BD235

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BD235 is a member of the single bipolar transistor family. It is a widely used transistor designed for use in a wide range of applications spanning across a variety of industries. As a single transistor, it requires fewer components and is therefore less expensive to manufacture than multiple transistor configurations. The BD235 is typically used as an amplifier, or as a replacement for an amplifier in an existing system. Additionally, it can also be used as a bypass, voltage regulator, current source or current sink.

The BD235 is a NPN transistor, meaning that it operates on the principle of negative resistance. It is constructed from a three layer semiconductor sandwich of semi-insulating material, such as silicon, that are doped with specific elements. Two of these layers are known as the emitter and collector and form the base of the transistor, while the third layer forms the gate and is used to control the amount of current flow between the emitter and collector. When a voltage is applied to the gate, it can either increase or decrease the current flow depending on which polarities are used.

The BD235 has many advantages over other transistor types. It is inexpensive, reliable and doesn’t suffer from semiconductor noise or ageing. Additionally, its small size and power requirements make it well suited for a variety of applications. Additionally, its low input voltage requirements and low power consumption make it an ideal choice for mobile and battery operated applications.

The BD235 can be used in three main applications: as an amplifier, a bypass or a voltage regulator. In an amplifier configuration, the transistor amplifies the input signal and produces a higher output signal. The amplified signal can be used to control the speed of a motor, the intensity of a light or a variety of other applications. In a bypass configuration, the transistor acts as an electronic switch, controlling the current flow between two points in a circuit. Lastly, as a voltage regulator, the BD235 controls the voltage applied to a load, allowing it to remain constant even when the input voltage changes.

The BD235 is capable of handling currents of up to 40mA and has a power dissipation of up to 1W. It has a breakdown voltage of 45V and an inherent gain of 400. It is built in a TO-57 package and is available in both through-hole and surface mount configurations. This makes it an ideal choice for both through-hole and surface mount applications.

In conclusion, the BD235 is a widely used single bipolar transistor. It is capable of providing amplification, bypassing, voltage regulation and other functions, making it suitable for a variety of applications. It is also inexpensive, reliable and requires minimal power, making it ideal for mobile and battery operated applications.

The specific data is subject to PDF, and the above content is for reference