BTA26-600BW

Series:	Snubberless™
Packaging:	Tube
Part Status:	Obsolete
Triac Type:	Alternistor - Snubberless
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	25A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	250A, 260A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	75mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TOP-3 Insulated
Supplier Device Package:	TOP3
Base Part Number:	BTA26

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BTA26-600BW Application Field and Working Principle

The BTA26-600BW is a TRIAC device that has many uses in various applications. This device is a high voltage, high power thyristor that has applications ranging from motor control to power switching. The BTA26-600BW can be used to control the speed of a motor using pulse width modulation (PWM). It can also be used to switch power in many applications such as a solenoid, contactor, or inverter. This type of thyristor was developed by the European company, ST Microelectronics. The company has continued to develop newer versions of their TRIACs, with the BTA26-600BW being their most recent version. The device is designed to be capable of controlling high power, allowing for it to be used in applications that require switching of large amounts of power. The BTA26-600BW is a three-terminal silicon thyristor. It has a maximum blocking voltage of 600V, and a maximum off-state leakage current of 10mA. The BTA26-600BW is a low-on voltage thyristor, which means that it requires only a few volts to turn on. The device has a high holding current of 30mA, and a rated gate current of 250mA. This makes it ideal for applications that require switching high-powered loads. The BTA26-600BW has a static on-state voltage of 1V and a static off-state voltage of 0.5V. The device has an average turn-off time of 0.2μs, and an average on-time of 0.4μs. The device has a high insulation resistance and can withstand temperatures up to 125°C.The BTA26-600BW works by having a gate voltage applied to it. This gate voltage causes a flow of electrons through the device, which causes the thyristor to turn on. Once this on-state has been reached, the current will remain on until the gate voltage is removed, at which point the device will switch off. This action can be used to control high power loads, as the device can be switched on and off as required to control the current flow.The BTA26-600BW can also be used as a DC motor controller. This is achieved by using pulse-width modulation (PWM). In this application, the device will receive a signal to turn on and off several times per second. This on and off switching will cause the motor current to be adjusted, allowing for the speed and torque of the motor to be controls.In conclusion, the BTA26-600BW is an advanced three-terminal thyristor capable of controlling high power loads. It is capable of controlling both AC and DC motors, and can be used as a switch for contactors, solenoids, and inverters. The device is designed to be very reliable, with a high insulation resistance and high temperature rating. Its low on-voltage and high gate current means it can handle high power load switching with ease.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description