Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

Thyristors, also called silicon controlled rectifiers or SCRs, are semi-conductor components that act similarly to transistors. In the simplest terms, the SCR acts like a switch, allowing current to pass if a certain voltage is applied. When used in combination with other components, SCRs can be utilized for a variety of applications. One variety of SCR is the TRIAC, or triode alternating current thyristor. The BTA308X-800F0/L03Q is one type of TRIACs, and this article will discuss its application fields and working principles.

Application Fields

The BTA308X-800F0/L03Q TRIAC is designed to be used in almost any application that requires quick control of alternating current. It is typically used in lighting and motor speed control, as it is capable of handling 800V and 8A at 50Hz. It can also be used in applications such as motor speed control, motor soft-start, inrush (“line-load”) current limiting, phase angle control and other operations related to alternating current. As the BTA308X-800F0/L03Q is capable of being triggered on by either a positive or negative phase voltage, it can also be used in applications in which both phases of an alternating current are required to be switched.

Working Principles

The BTA308X-800F0/L03Q is a four-layer, two-terminal thyristor, meaning that it has two external terminals: Gate and Main. The Gate terminal is used to control the on/off state of the SCR and the Main terminal is where the voltage and current flow into the TRIAC. The operation of the BTA308X-800F0/L03Q is such that when a certain gate current, known as the latching current, is applied to the Gate terminal, the TRIAC is turned on. When the latching current is removed from the Gate terminal, the TRIAC will remain in the on-state until the current flow through the Main terminal drops below a certain value. Once this occurs, the TRIAC will turn off.

The BTA308X-800F0/L03Q also has what is known as a “self-triggering” capability. This means that when the TRIAC is turned on, the internal structure of the device will allow it to remain on without the need for an externally applied latching current. This makes it ideal for applications in which the TRIAC needs to be switched quickly and reliably.

In summary, the BTA308X-800F0/L03Q is a type of TRIAC that is used for applications requiring the quick control of alternating current. It is capable of handling up to 800V and 8A at 50Hz, and it has a self-triggering capability meaning that it will remain in the on-state once it has been switched on. This makes it ideal for a variety of applications, from motor speed control to lighting control to phase angle control.

The specific data is subject to PDF, and the above content is for reference