BTA316X-600E,127

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	16A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	140A, 150A
Current - Gate Trigger (Igt) (Max):	10mA
Current - Hold (Ih) (Max):	15mA
Configuration:	Single
Operating Temperature:	125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	TO-220F
Base Part Number:	BTA316

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACsThyristors have evolved over time to serve the needs of increasingly complex electrical applications, and the BTA316X-600E,127 is one such device. It belongs to a family of Thyristors called TRIACs. TRIACs, also known as Triode for Alternating Currents, are four-layered, three-terminal semiconductor devices used for controlling current in AC circuits. They are able to provide bidirectional current control for AC power devices and applications.The BTA316X-600E,127 is optimized for use in both phase control and full-wave applications. With an absorption voltage of 6V, a blocking voltage of 600V, and a repetitive peak off-state voltage of 600V, the BTA316X-600E,127 is a reliable and robust device that can be used in a variety of applications.In terms of applications, TRIACs are used in a range of AC power applications such as motor controls, lights and lighting controls, heaters, dimmers, and power supplies for a variety of electronic devices. The TRIAC device can be used in both triggering and reverse polarity applications, making it well suited for controlling both AC and DC power devices.In terms of working principle, a TRIAC comprises three terminals called the Anode, Gate and Cathode. The Anode and Cathode terminals are connected to the AC power source, and the Gate terminal is used to control the current flow between the Anode and Cathode. The Gate terminal is connected to an external circuit, trigger voltage, or an external control circuit.When the Gate terminal is connected to a voltage greater than the Anode (holding) voltage, the TRIAC will begin to conduct current. The TRIAC begins to conduct by first passing a small current through the Anode and Cathode, known as the conduction angle. As this current increases, the Anode and Cathode terminals become more forwardly biased, and eventually the device will reach a breakdown voltage, and will continue to conduct current until the Gate voltage falls below the Anode voltage.When the Gate and Cathode terminals are properly connected, the device can be used to control AC current by varying the Gate voltage. By varying the Gate voltage, the TRIAC can be used to control the amount of current passing through the device and the conduction angle. In applications such as dimmers, this can be used to control the intensity of a light or heater that is connected to the Anode and Cathode terminals.The BTA316X-600E,127 provides a reliable and robust solution for controlling AC power devices. Its 6V absorption voltage, 600V blocking voltage, and 600V repetitive peak off-state voltage, make it well suited for use in a variety of AC power applications such as motor controls, dimmers, and lighting controls. Furthermore, due to its ability to be used in both triggering and reverse polarity applications, it is one of the most reliable and versatile TRIAC devices currently available on the market.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description