BZX84C2V7LT1 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZX84C2V7LT1 diode is a Zener diode, in the single diode category. Specifically, the Zener diode is designed to allow the flow of current in one direction, while providing a regulated, static voltage across its terminals. This allows it to be used as a voltage-limiting device, often in circuits which have excess voltages. It also has applications in providing a stable voltage to protect sensitive circuits.

Zener diodes have an anode side connected to the positive side of the power supply, and a cathode side connected to the negative side. When an excess of voltage is present on the anode side, the diode conducts current, rather than providing a static voltage. When the voltage on the anode side exceeds the Zener voltage, the diode will then provide a static voltage which is independent of the supply voltage.

The static voltage which the BZX84C2V7LT1 diode provides is 2.7V, with an operating range of 0.25mV to 2.6V. It has a dynamic impedance of less than 5ohm, a power dissipation rating of 500mW, and a Maximum Reverse voltage of 5V. The maximum Forward voltage of this diode is 0.5V, while its maximum reverse current is 50mA. This diode can operate in temperatures ranging from -65°C to +125°C, but has a storage temperature of -65°C to +150°C.

The BZX84C2V7LT1 diode is commonly used to provide a stable voltage in a variety of electronics. Its most common use is to protect sensitive circuits from voltage spikes, using the static voltage it provides to maintain a safe working environment. It is also commonly used to directly limit the voltage on the anode side, providing a static voltage source. This makes it particularly valuable in circuits where the power supply can vary greatly, such as in smaller battery-powered electronics.

In most applications, the BZX84C2V7LT1 diode requires a simple circuit for protection. This usually consists of a resistor connected to the diode\'s anode side, and the cathode connected to ground. This helps to limit the current entering the diode, while allowing it to regulate the static voltage. If a higher static voltage is required, the resistor can be increased in value, or the diode can be connected in series with another diode with a higher Zener voltage.

The BZX84C2V7LT1 diode also has applications in voltage-monitoring circuits. These circuits allow for the detection of small changes in input voltage, allowing for the detection of faults and monitoring of equipment. In these circuits, the diode is often connected in series with a voltage-dependent resistor, with the anode side of the diode connected to the resistor. The static voltage provided by the diode can then be monitored, providing a warning if the voltage drops below a certain level.

The BZX84C2V7LT1 diode is a valuable device, suitable for use in a variety of electronic circuits. With its wide operating range and static voltage, it provides a reliable, cost-effective solution for limiting voltage, providing voltage-monitoring, and protecting sensitive circuits. It is a valuable tool in the development of reliable, safe electronics.

The specific data is subject to PDF, and the above content is for reference