CGH40180PP-TB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF components are one of the most important components used in a wide variety of radio and cellular systems. The CGH40180PP-TB RF Evaluation and Development Kit is used to measure and test components in both lab and field applications. It consists of two main components: the RF signal source and the RF power amplifier (PA) board.

The RF signal source is the main element of the kit, and it consists of a sinusoidal wave generator, a bandpass filter, and a directional coupler. The frequency of the generator is adjustable within a range of 10 kilohertz (kHz) to 2.45 gigahertz (GHz). The bandwidth of the wave generator is spectrum analyzer dependent, and can be limited to about 10 kHz. The directional coupler is used to measure the forward and reflected power of the signal source on separate ports of the same board.

The RF power amplifier (PA) board is the secondary component, and it contains two sets of components: a power amplifier and a directional coupler. The power amplifier is composed of a transimpedance amplifier (TIA) for signal gain and a power amplifier (PA) for power gain. The TIA amplifies the RF signal from a low level to a high level, while the PA amplifies it further to produce a strong output signal. The directional coupler measures the input and output power of the signal from the TIA and PA, respectively, on separate ports of the board. This allows the evaluation kit to measure the power efficiency of the signal chain.

The CGH40180PP-TB RF Evaluation and Development Kit is used in a variety of applications, such as mobile communication systems, wireless power transfer systems, and broadband radio systems. It provides a reliable and accurate method of testing and evaluating RF components when used in combination with other Radio Frequency (RF) test equipment. This helps to simplify design and implementation, which in turn increases accuracy and reliability.

The working principle of the CGH40180PP-TB RF Evaluation and Development Kit is relatively simple. The RF signal source generates a sinusoidal wave with a frequency that is adjustable within a range of 10 kHz to 2.45 GHz and a power output of up to +30dBm. The TIA amplifies the signal from a low level to a high level, while the PA amplifies it further to produce a powerful signal. The directional coupler on the PA board is used to measure the forward and reflected power of the signal from the TIA and PA, respectively, on separate ports of the board. The measurements from both the signal source and PA boards can be used to calculate the power efficiency of the signal chain.

Overall, the CGH40180PP-TB RF Evaluation and Development Kit provides an accurate and efficient way to measure and test RF components. It is highly reliable and can be used in a variety of applications for testing and evaluating RF components and systems. It is fairly straightforward to use and requires minimal setup, which enables engineers to quickly and efficiently design and implement RF systems and components.

The specific data is subject to PDF, and the above content is for reference