CNY17F4

Output Type:	Transistor
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	100mA
Voltage - Forward (Vf) (Typ):	1.35V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	1µs, 2µs
Turn On / Turn Off Time (Typ):	2µs, 3µs
Current Transfer Ratio (Max):	320% @ 10mA
Current Transfer Ratio (Min):	160% @ 10mA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic OutputThe CNY17F4 is a type of optoelectronic device known as an optoisolator, which is used to transfer electrical signals from one circuit to another while electrically isolating the two circuits. An optoisolator works by using a light-emitting diode (LED) to modulate light in a phototransistor, which is then used to create an output in the secondary circuit. The CNY17F4 is a 6-pin optoisolator made by Vishay Intertechnology.The CNY17F4 is specifically categorized as a transistor, photovoltaic output optoisolator. This means it contains a photovoltaic output transistor, which is a type of transistor that uses the photovoltaic effect to transfer light into electrical energy. Instead of using the electrical energy produced by the phototransistor directly, the CNY17F4 optoisolator uses it to control a field-effect transistor (FET). This FET then produces the output signal, which is used to control external components in the secondary circuit.The CNY17F4 optoisolator contains an LED mounted in a 6-pin DIP package, which is powered with a supply voltage of 9.6 V and rated for 16 mA. The luminous intensity of the LED is approximately 35 mW/sr at a wavelength of 940 nm. The phototransistor is activated when the LED is energized and produces a current of 200 uA for every 65 mW/sr of incident light. The FET used in the CNY17F4 is a depletion mode N-channel FET, which has a low on-resistance of 10 ohms.In terms of signal isolation, the CNY17F4 offers up to 5,000V RMS (2) (60 Hz) of electrical isolation between the input and output circuits. This ensures that the two circuits remain electrically isolated, while still allowing a signal to be transferred between them. The CNY17F4 is also RoHS compliant and is rated for operation over a temperature range of -40°C to +85°C.The CNY17F4 optoisolator is used in a variety of applications in electronics and electrical engineering. It is often used to transfer signals across isolation boundaries in industrial waveform generator applications and for interfacing between digital logic circuits and analog control circuits in industrial automation systems. The CNY17F4 is also used in medical and telecommunications equipment, where wide electrical isolation is needed in order to protect sensitive circuits from electrostatic discharge or surges in the power lines. Lastly, the CNY17F4 is commonly used for a variety of circuit protection applications, such as protection from short circuits and ensuring correct polarity of output signals. Overall, the CNY17F4 optoisolator is a highly reliable and cost-effective solution for transferring signals between circuits while providing outstanding signal isolation. Its high performance and wide operating temperature range make it a popular choice for a variety of industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description