CNY17F-1X017

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components used to isolate two electrical circuits from each other. They are used to protect one circuit from interference from the other, or to prevent damage due to an overload. The type of optoisolator in question is a CNY17F-1X017, a transistor output optoisolator. It uses an LED to activate a transistor, which in turn generates a signal. The optoisolator has two sections, an input section and an output section.

CNY17F-1X017 Application Field and Working Principle

The CNY17F-1X017 optoisolator is designed to provide an electrical isolation between two circuits, a control circuit and a load circuit. The input section is connected to the control circuit and receives signals from it. The LED is driven by the input signals, which in turn illuminates the photovoltaic element in the output section. The photovoltaic element in the output section generates an output signal that is sent to the load circuit. This signal is generated when the LED illuminates the photovoltaic element. The output signal produced by the CNY17F-1X017 optoisolator is proportionally related to the input signals.

The CNY17F-1X017 optoisolator can be used in a variety of applications, such as motor control, pulse measurement, or contactless switching. It can also be used to connect two circuits that have different voltage levels, as it provides a galvanic isolation between them. The optoisolator can be used to provide reliable isolation between two circuits even in the presence of high interference levels or fast transients. Its response time is usually within microseconds, depending on the characteristics of the load and the signal applied.

The CNY17F-1X017 optoisolator has a wide input voltage operating range. It has a common-mode transient immunity of 30kV/μs, making it suitable for use in harsh electrical environments. The output transistor also has a breakdown voltage of 600V and can be used to drive relay coils, LEDs, and other loads operating at high voltage.

The CNY17F-1X017 optoisolator is a reliable device that provides electrical isolation between two circuits. Its galvanic isolation allows it to protect the control circuit from interference from the load circuit. Its wide operating range and fast response time make it suitable for a variety of applications. The output transistor has a breakdown voltage of 600V, allowing it to drive high voltage loads. It is a flexible device that is easy to use and provides reliable electrical separation between circuits.

The specific data is subject to PDF, and the above content is for reference