CY7C185-35PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY7C185-35PC is a 512 bit nonvolatile CMOS static RAM chip used primarily as a nonvolatile memory in embedded systems. It has a wide range of applications in computing, industrial, medical, and consumer electronics. This article looks at the application field and working principle of the CY7C185-35PC.

Application Field

The CY7C185-35PC is used in a variety of embedded systems where stable and reliable data storage is needed. It is suitable for use in consumer devices, factory automation equipment, and medical devices. It is also suitable for use in embedded controllers, portable computers, and hand-held devices.

The CY7C185-35PC provides a number of features that make it suitable for embedded systems. It has low power consumption and a fast write cycle time. It can store up to 512 bits of data and provides a hardware lockout feature to prevent unauthorized access. Additionally, the CY7C185-35PC supports programmable address decoding and can be operated in either two or three-wire SPI modes.

Working Principle

The CY7C185-35PC operates using the Serial Peripheral Interface (SPI) bus. The SPI bus is a synchronous serial communication interface that allows multiple peripherals to communicate with a single host processor. The CY7C185-35PC can support up to 16 slave devices on the same SPI bus.

The SPI bus consists of four lines - clock (SCK), data in (SDI), data out (SDO), and chip select (CS). The SCK line is used to synchronize data transfers. The SDI line is used to transmit data from the master (host) to the slave (peripheral). The SDO line is used to transmit data from the slave to the master. The CS line is used to select the slave device to which the data will be transferred.

The CY7C185-35PC supports both two-wire (SCK and SDI) and three-wire (SCK, SDI, and SDO) SPI communication. The CY7C185-35PC supports up to four 8-bit registers for data storage and four software controlled status bits for status information. Data can be written to the relevant registers by sending a command on the SDI line and waiting until the SCK line goes low to indicate that the write is complete.

The CY7C185-35PC is an ideal choice for applications requiring a nonvolatile memory solution. Its low power consumption, fast write cycle time, and programmable address decoding make it suitable for use in embedded systems. Additionally, the CY7C185-35PC can support up to 16 slave devices on the same SPI bus, allowing it to scale to meet the needs of larger applications. With its wide range of features and capabilities, the CY7C185-35PC is an excellent choice for embedded memory applications.

The specific data is subject to PDF, and the above content is for reference