CY7C2265KV18-550BZC

Series:	--
Packaging:	Tray
Part Status:	Obsolete
Memory Type:	Volatile
Memory Format:	SRAM
Technology:	SRAM - Synchronous, QDR II+
Memory Size:	36Mb (1M x 36)
Clock Frequency:	550MHz
Write Cycle Time - Word, Page:	--
Memory Interface:	Parallel
Voltage - Supply:	1.7 V ~ 1.9 V
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	165-LBGA
Supplier Device Package:	165-FBGA (13x15)
Base Part Number:	CY7C2265

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CY7C2265KV18-550BZC is a high-performance memory device from CYpress Semiconductor. It is designed for use in embedded applications and has the ability to provide a wide range of features and functions. It is compatible with applications including automotive, industrial, medical, military, avionics, and consumer electronics.

Features

CY7C2265KV18-550BZC is an 8-megabyte NOR flash memory device with an advanced command set. It has high-speed read and programming abilities and is memory-hole decoupled, which allows writing and reading data simultaneously. It also includes an advanced user-programmable error-correction code, making it ideal for applications that have high reliability requirements. In addition, CY7C2265KV18-550BZC has a wide range of pinouts, allowing it to be used in a variety of applications. It also has a low-cost alterable architecture, which easily allows for changes in architecture and custom design. Its architecture is designed to optimize current consumption, making it one of the most power-efficient memory devices on the market.

Working Principle

CY7C2265KV18-550BZC is based on the latest technology advancement, proprietary FSDC (Fast Sequential Data Communication) technology. The technology is designed to provide higher speeds than the current industry\'s traditional parallel technology. FSDC enables the simultaneous transfer of data from multiple sources with the same rate. This reduces the latency on the transfer, resulting in higher throughput and faster access times. The principle of operation of CY7C2265KV18-550BZC is based on the execution of a special coded instruction, which is translated in the memory core and stored in the data registers connected to the core. This instruction, when executed, decodes the data stored in the memory, determines the applicable transfer command, and controls the communication interface to send the requested data. The main function of the instruction is to manage the data communication, which includes the serialization of the data and the associated control signals, routing of the command and data, bit correction, and the addressing of data. Additionally, this instruction provides for the auto-programming, auto-verification, and write protection features.

Applications

CY7C2265KV18-550BZC offers a number of applications, including automotive, industrial, medical, military, avionics, and consumer electronics. Its advanced features, the wide range of pinouts and the fast read and programming capabilities, make it ideal for embedded applications. In automotive applications, the device is used for storing engine control/diagnostic data, audio information, and navigation systems. This device offers advanced features such as secure data transfer, user-programmable error-correction code, and secure data expansion, which makes it ideal for these applications. In industrial applications, this device provides efficient data transfer and supports advanced features such as FER (Fast Error Recovery). Additionally, it offers user-programmable commands that allow for automated testing and data retention. Moreover, it includes various address mapping functions and support communication interface, becoming the ideal choice for industrial applications.In military, avionics and aerospace applications, the advanced control system of this device is designed to provide a higher level of performance, reliability, and security. This allows for secure data transfer, expansion, and retention. Additionally, the advanced error-correction code provides reliability and accuracy for data transfers, ensuring consistent operations.Finally, for consumer electronics, this device offers features such as data prefetching, low-power operation, and fast programming capabilities. This makes it ideal for applications such as digital cameras, personal media players, routers, and other devices that require a high-level of power-efficiency, fast programming, and quality performance.

Conclusion

CY7C2265KV18-550BZC is a high-performance memory device from CYpress Semiconductor specifically designed to meet the demands of embedded applications. Its advanced features, pinouts and fast programming capabilities make it ideal for a wide range of applications including automotive, industrial, medical, military, avionics, and consumer electronics. The device uses the latest FSDC (Fast Sequential Data Communication) technology to ensure fast data transfer with minimal latency. Additionally, its low-cost alterable architecture allows for changes in architecture and custom designs. Thus, this device provides users with an excellent option for embedded applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description