CY7C4285V-15ASI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CY7C4285V-15ASI belongs to a relatively new logic–FIFOs memory configured as a multiple independent port–RAM. In particular, the CY7C4285V-15ASI is configured as a Fifo-RAM with the Cypress CY7C4285V-15ASI on-board four independent FIFO controllers and a shared −80-Kb USB RAM. The FIFO-RAM technology provides high-speed interfacing and address aliasing that can create up to eight independent FIFO controllers from the shared memory. This type of memory is well suited for embedded applications as it allows for rapid data transfer and efficient inter-controller communications.

The CY7C4285V-15ASI operates up to a maximum frequency of 25MHz and includes 8-bit and 16-bit data and address buses. The memory is always enabled and the device can use as little as 2.5V of power. The CY7C4285V-15ASI can also be used with a variety of microcontrollers and SoC devices. With its low power, high performance, and low-noise operation, the CY7C4285V-15ASI is ideal for embedded applications.

The CY7C4285V-15ASI uses a FIFO (First-in, First-out) buffer. Data is written to an input buffer, and read from an output buffer in the same order. The buffers are divided into two separate areas, each with their own read and write pointers. When data is written to the FIFO, the write pointer is incremented. When data is read from the FIFO, the read pointer is incremented. Both pointers will wrap around to the beginning of the buffer after they have read or written all of the data in the FIFO.

The FIFO-RAM in CY7C4285V-15ASI consists of 8-Kb of RAM, which can support up to eight FIFOs, each with a separate read/write pointer. Writing and reading data is done through dedicated read/write interfaces. The internal FIFO-RAM can be configured with various access port widths, such as 8-bits, 16-bits, or 32-bits. Read/write operations are performed in serial fashion and can use user-defined sequences for varying data widths.

FIFO-RAM in CY7C4285V-15ASI provides several advantages over other memory devices such as SRAM, DRAM, and Flash. One major advantage of FIFO-RAM is its fast access time, compared to DRAM and Flash. FIFO-RAM is also advantageous because it can be used to interconnect multiple controllers in embedded systems. This allows for rapid and efficient data transfers between different controllers with minimal latency.

The CY7C4285V-15ASI features various configuration options, such as word size, access port width, interrupt capabilities, and multiple read/write modes. Additionally, the FIFO-RAM can be configured to use the internal USB interface, giving it wide compatibility with various microcontrollers and SoC devices. This makes the CY7C4285V-15ASI a suitable choice for a variety of embedded applications.

In summary, the CY7C4285V-15ASI is a FIFO-RAM based memory device with a wide range of features and configuration capabilities. The device is well suited for embedded applications that require high-speed data transfer with minimal latency. With its low power consumption and high performance, the CY7C4285V-15ASI is an optimal choice for embedded systems.

The specific data is subject to PDF, and the above content is for reference