CY7C63231A-SC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY7C63231A-SC is a USB-Serial Bridge Controller that provides a USB to Serial conversion interface. It is commonly used in consumer electronics, industrial applications, and automotive solutions. The device features a high-speed serial port with a USB interface, providing a cost-effective solution for connecting a computer to a serial port. The device supports multiple protocol standards, including UART, I2C, SPI, and CAN.

The CY7C63231A-SC is a USB-to-UART bridge device. It is designed to interface between a USB host and slave controllers, providing full-duplex communication and asynchronous serial data transfer rates up to 12 Mbps. This allows for effortless integration of USB and UART devices into any embedded system. The bridge has integrated power-down mode and low-power sleep mode and can accept and send USB control signals, allowing for better system performance and interoperability. The device also supports multiple protocol standards, including UART, I2C, SPI, and CAN.

The engineering advantages of the CY7C63231A-SC device are mainly related to its simple configuration and minimum external components. To begin, the device integrates an on-chip USB controller and an 8051-based microcontroller, which eliminates the need for additional controllers. Additionally, the device is built with a buck/boost voltage regulator, allowing it to accommodate different input power levels and configurations. Finally, a single, configurable interrupt line simplifies the programming of the internal peripherals.

In terms of system features, the device is designed to be mixed with a wide variety of embedded system controllers, including microcontrollers and DSPs. It supports virtual COM port, supports data transfer rate up to 12 Mbps, and provides a UART interface with up to 10 GPIO ports. It also has an on-chip voltage regulator that allows for powering the device with different input voltages, such as 3.3V and 5V. Furthermore, the device supports during sleep mode, allowing for lower power consumption.

The working principle of the CY7C63231A-SC device is quite simple. Upon connecting to a USB port, the device is powered up and begins operation automatically. The USB controller integrated internally is responsible for the initial configuration so that the device can respond to commands sent by the USB host. The device adopts a request-response protocol, in which requests are sent between the device and USB hosts, and the device responds with the requested data. The transfer rate is also based on the protocol used by the USB host interface.

To summarize, the CY7C63231A-SC device is an application specific embedded microcontroller that provides a USB to serial conversion interface. It features a high-speed serial port with integrated USB and an 8051-based microcontroller. It is designed to be used in consumer electronics, industrial applications, and automotive solutions. It supports a wide range of protocol standards, including UART, I2C, SPI and CAN. Furthermore, it has integrated power-down mode and sleep mode, as well as a simple configurable interrupt line. The working principle of the device is based on a request-response protocol between the device and the USB host, and the data transfer rate is based on the protocol used by the USB host.

The specific data is subject to PDF, and the above content is for reference