CY7C68034-56BAXC

Series:	EZ-USB NX2LP-Flex™
Packaging:	Tray
Part Status:	Obsolete
Controller Type:	NAND Flash - USB
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	0°C ~ 70°C
Package / Case:	56-VFBGA
Supplier Device Package:	56-VFBGA (5x5)
Base Part Number:	CY7C68034

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CY7C68034-56BAXC is a memory controller developed by Cypress Semiconductor Corporation, which aims to simplify the access, response, and operation of memory devices. The application and working principles of CY7C68034-56BAXC memory controller are explained in this paper.

Application Field

CY7C68034-56BAXC is widely used in embedded and mixed-signal designs. It is an ideal choice for system-on-chip (SoC) designs where it can reduce cost, board space and power consumption. It is also suitable for multi-system configurations and system integrations. The great advantage of CY7C68034-56BAXC is that it can provide a high level of design flexibility for applications such as automotive, industrial, medical and consumer products.CY7C68034-56BAXC is also suitable for embedded designs that require data storage, such as in the areas of set-top boxes, kiosks, gaming consoles, AC/DC, power management, and medical equipment. It is also a good choice for wireless applications, such as Bluetooth, WiMAX and Zigbee applications.

Working Principle

CY7C68034-56BAXC memory controller uses an ARM Cortex-M4 processor which is designed for low power applications. It operates at a maximum of 100MHz, and is capable of executing up to 200 DMIPS (Dot Multi-Instruction Per Second).The controller also implements a Full-Duplex Serial Boot ROM (FSBR), which allows the device to be programmed without external RAM. The controller is also capable of programming external devices, and possesses an ARM Debug and Trace (DTMC) interface. The DTMC supports breakpoints and watchpoints for debugging of software.The memory controller makes use of the Cypress eSSD controller, which helps in improving the performance of the device, by allowing up to 2400 Mbps data transfer speed. This is twice the speed of the previous generation of controllers.The memory controller also implements a wide range of memory interfaces, such as LPDDR3, DDR3/2/1, MMC/SD and NAND flash. The controller supports up to 8GB of total system memory and can be configured to support 2GB, 4GB or 8GB of system memory.

Conclusion

CY7C68034-56BAXC is a versatile memory controller developed by Cypress Semiconductor Corporation. The controller is widely used in a variety of embedded and mixed-signal designs, due to its low power consumption and high level of design flexibility. The controller operates with a maximum speed of 100MHz, and makes use of the Cypress eSSD controller for improved performance. It also supports a wide range of memory interfaces, and its implementation of a Full-Duplex Serial Boot ROM allows for easy programming of the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description