DG308BDY-T1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG308BDY-T1 is an analog switch which is commonly used as a multiplexer and demultiplexer. It is suitable for both high-speed applications and low-speed applications. This switch is part of the DG308 series of CMOS switch designed particularly for low-voltage, low-current applications.

The DG308BDY-T1 is suitable for use in applications such as signal multiplexing and de-multiplexing. In addition, the switch can be used as a Sample and Hold switch, or as an On/Off switch for systems that require a low power control and/or high switching speed. It has a minimum on-state resistance of 50 ohms and a maximum on-state resistance of 300 ohms, which makes it suitable for use in signal conditioning applications.

The DG308BDY-T1 consists of a single monolithic integrated circuit (IC). The IC has an array of CMOS switches, which can be either switched on or off. It also has a control input, which can be used to control the state of the switches. The control input is connected to the control logic, which is used to control the switching of the switches. The logic circuit can also be used for other functions such as selectable input voltage levels or selectable input or output levels.

The DG308BDY-T1 is designed to operate with a supply voltage of 5V. The maximum output current is 10mA and the maximum input voltage is 5V. The power dissipation of the IC is 0.45W. The temperature range of the IC is -55C to +85C.

The DG308BDY-T1 has an anti-latching feature, which is designed to prevent the switch from latching in the "on" state. This feature helps ensure that the switch does not remain on after the input signal is no longer applied. This feature can be used to reduce the amount of power consumption when the switch is off. The IC also has a protection circuit, which prevents damage to the IC due to over-voltage or over-current conditions.

The working principle of the DG308BDY-T1 is simple. When the control signal is applied to the control input, the CMOS switches are connected to the control logic, which controls the switching of the switches according to the logic levels. When the control signal is removed, the switches revert to the off state.

The DG308BDY-T1 application field typically involves signal multiplexing and de-multiplexing. It can also be used in signal conditioning applications, such as Sample and Hold switches, where the switch is used to keep the input signal in a fixed state. Additionally, the device is used in On/Off control systems where low power control and/or high switching speed is required.

In summary, the DG308BDY-T1 is an analog switch which is suitable for use in both high-speed applications and low-speed applications. It is part of the DG308 series of CMOS switch designed particularly for low-voltage, low-current applications. The device includes a single monolithic IC which has an array of CMOS switches, a control input, and a logic circuit. The device has an on-state resistance of 50-300 ohms, a maximum output current of 10 mA, a maximum input voltage of 5V, and a power dissipation of 0.45W. The working principle of the device is simple. When the control signal is applied to the control input, the CMOS switches are connected to the control logic, which controls the switching of the switches according to the logic levels. Finally, the DG308BDY-T1 is mainly used in applications such as signal multiplexing and de-multiplexing, signal conditioning, and On/Off control systems.

The specific data is subject to PDF, and the above content is for reference