DG407DN-T1-E3

Switch Time (Ton, Toff) (Max):	200ns, 150ns
Base Part Number:	DG407
Supplier Device Package:	28-PLCC (11.51x11.51)
Package / Case:	28-LCC (J-Lead)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	8pF, 65pF
Charge Injection:	15pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±5 V ~ 20 V
Voltage - Supply, Single (V+):	12V
Channel-to-Channel Matching (ΔRon):	5 Ohm
On-State Resistance (Max):	100 Ohm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	8:1
Switch Circuit:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DG407DN-T1-E3 is a very useful analog switch or multiplexer, which is used to select between two or more analog signals. This makes it an incredibly versatile tool in both the fields of communication and circuit design. With the right settings, it can be used in a variety of applications such as amplifiers, demultiplexers, and more.

Applications

The DG407DN-T1-E3 can be used in a variety of applications where an analog switch is needed, including:

• RF circuit design: In the field of RF communication, the DG407DN-T1-E3 can be used to switch between multiple frequencies. This makes it an excellent choice for use in radio systems where frequency agility is important.
• Data acquisition: The DG407DN-T1-E3 can be used in systems that require acquisition of data from multiple channels. For example, it can be used to select between multiple sensors for data measurement.
• Analog signal routing: In analog systems, the DG407DN-T1-E3 can be used to route signals between different components or systems. This makes it a great choice for routing analog signals in complex systems.
• Audio/Video switching: The DG407DN-T1-E3 can also be used in audio/video applications. It can be used to switch between different sources of audio or video signaling in multiplexing applications.
• LED Driving: The DG407DN-T1-E3 can also be used for driving LEDS. It can be used to switch between multiple LED signals for dimming control.

Working Principle

The working principle of the DG407DN-T1-E3 is fairly simple. It has two inputs and four outputs, and can be used to switch a signal between the two. The switching is controlled by an enable signal which is sent to the IC, and this triggers the switching process. The DG407DN-T1-E3 works by applying a low voltage to the enable terminal, and this causes the switching process to begin. The signal is then routed through the multiplexer, and by switching the voltage on the enable pin, the signal can be directed to one of four outputs. This makes the DG407DN-T1-E3 an incredibly versatile tool for switching between multiple signals.

Conclusion

The DG407DN-T1-E3 is a very useful analog switch or multiplexer, which can be used in a variety of applications. It can be used for RF circuit design, for data acquisition, for analog signal routing, for audio/video switching, and for driving LEDs. It has two inputs and four outputs, and can be used to switch between different signals by applying a low voltage to the enable pin. This makes the DG407DN-T1-E3 a great choice for any application where an analog switch or multiplexer is needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description