DG612AEN-T1-E4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches, multiplexers, and demultiplexers facilitate the process of routing electrical signals by controlling their flow through a circuit. The DG612AEN-T1-E4 is an integrated circuit containing both a single pole double throw (SPDT) analog switch and a double-pole two-throw (DP-2T), or dual SP-2T, multiplexer/demultiplexer IC. This combination IC serves both as a switch and as a multiplexer.

The DG612AEN-T1-E4 is a single-supply, low-power CMOS device with a wide range of operating voltages from 2.7 to 5.5-V. The device\'s two analog switches are designed for low noise, low on-resistance, and improved linearity. Its two multiplexers/demultiplexers feature TTL and CMOS logic compatibility, low power consumption, and a high-output drive capability of up to +24 mA. The integrated circuit is ideal for controlling high-impedance signals, as well as switching multiple analog and digital signals.

The DG612AEN-T1-E4 is commonly used in the following applications:

• Telecommunications
• Audio/Video
• Data Acquisition
• Test Equipment
• Automated Test Equipment (ATE)
• Industrial Control
• Medical Imaging
• Networking Equipment

The working principle of the DG612AEN-T1-E4 is quite simple. The analog switch accepts two single-ended inputs, and routes either one to its output. The multiplexer requires four inputs and two outputs. The four input channels are individually addressable, and each input can be assigned to either of the two outputs. The demultiplexer works in a similar manner, except that it can route four input channels to one output.

The analog switch is controlled by two logic signals: the Switch Enable (SE) pin, and the Select (S) pin. With SE high, the analog switch is enabled and the S pin determines which input is selected. With SE low, the analog switch is disabled, and the output remains in a high-impedance state. The multiplexer is controlled using two digital signals, A and B, which select the desired input. The demultiplexer is controlled using two digital signals, A and B, which select the desired output.

In summary, the DG612AEN-T1-E4 device is a combination SPST switch and dual DP2T multiplexer/demultiplexer IC. It is suitable for a wide range of applications, including telecommunications, audio/video, data acquisition, test equipment, ATE, industrial control, medical imaging and networking equipment. The device is controlled by either two logic signals or two digital signals, depending on the application. The integrated circuit provides low on-resistance, high output drive capability, low power consumption, and good electronic noise immunity, making it an excellent choice for switching circuitry.

The specific data is subject to PDF, and the above content is for reference