DG613AEN-T1-E4

Switch Time (Ton, Toff) (Max):	55ns, 35ns
Base Part Number:	DG613
Supplier Device Package:	16-miniQFN (1.8x2.6)
Package / Case:	16-WFQFN
Operating Temperature:	-40°C ~ 125°C (TA)
Crosstalk:	-90dB @ 10MHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	2pF, 3pF
Charge Injection:	1pC
-3db Bandwidth:	720MHz
Series:	--
Voltage - Supply, Dual (V±):	±2.7 V ~ 5 V
Voltage - Supply, Single (V+):	2.7 V ~ 12 V
Channel-to-Channel Matching (ΔRon):	700 mOhm
On-State Resistance (Max):	115 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO/NC
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG613AEN-T1-E4 Application Field and Working Principle

Introduction

The DG613AEN-T1-E4 is a high-speed CMOS analog multiplexer/demultiplexer with a variety of features that support industry-standard interfaces. This device is available in 8W28 SSOP packaging, which is much smaller than other multiplexers/demultiplexers. The ICs are designed to offer low-power dissipation, fast switching speeds and low noise. They are also designed to operate in the temperature range of –40°C to +85°C, making them suitable for various applications in industrial, automotive, military and medical environments.

Application Field

The DG613AEN-T1-E4 is typically used in applications such as frequency synthesis, data acquisition systems, A/D and D/A converters, test and measurement equipment, data communications systems, and industrial control systems. The device is especially suited for applications that require precise control of analog signals, and can be used in multiplexing applications such as sample and hold amplifiers, operational amplifiers, and analog multiplexing, as well as demultiplexing applications such as digital-to-analog and analog-to-digital converters.The device is also suited for a variety of other applications, such as signal routing, clock distribution, and temperature control systems. Additionally, it can be used in audio and power systems as a buffer and isolation device, as well as a voltage translator and level shifter. Finally, it is used in optical and RF transmission systems to provide signal isolation.

Working Principle

The working principle of the DG613AEN-T1-E4 is based on two sets of five pins that can be independently controlled and operated. There is one set of control inputs that allow the user to select which channels to enable and which to disable, and a second set of control inputs that allow the user to select which channel is to be activated.The control inputs consist of a common control input (CCI) and a pair of digital control inputs (DCI1 and DCI2). The DCI1 and DCI2 inputs are used to select from four states of operation, including on, off, input high, and input low. When configured for the on state, both DCI1 and DCI2 must be set to logic high, and the CCI must be set to logic low. When configured for the off state, both DCI1 and DCI2 must be set to logic low, and the CCI must be set to logic high. When configured for the input high state, DCI1 must be set to logic high and DCI2 must be set to logic low, while the CCI must be set to logic low. Similarly, when configured for the input low state, DCI1 must be set to logic low and DCI2 must be set to logic high, and the CCI must be set to logic low.The multiplexer/demultiplexer also has three 8-bit bidirectional data output buses, one for each channel, as well as two 8-bit bidirectional data input buses, one for each channel. The data output buses are used to provide the output signal to up to three different circuits, and the data input buses are used to provide the input signal for up to three different circuits. Each data input bus has an associated enable signal, which must be set to the active-high level for the channel to be operational.In summary, the DG613AEN-T1-E4 is a versatile multiplexer/demultiplexer device that can be used in a wide variety of applications. It is able to support a variety of industry-standard interfaces, is small in size and has low power dissipation. In addition, it has fast switching speeds, low noise, and is designed to operate in the temperature range of –40°C to +85°C, making it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description