DS1013M-60+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Delay lines, also known as delay units, are special electronic components designed to store and transmit electrical signals from one place to another. The transmission of electrical signals is achieved by creating a series of delayed pulses or by delaying a continuous wave form in the range of nanoseconds up to milliseconds. Delay lines are used for a multitude of crucial electronic applications, ranging from the minimal delay of a single pulse or wave echo on a line, to the precise control of multiple signals to be processed in parallel or in series.

The DS1013M-60+ is a high-performance delay line manufactured by NEC. This product is intended to be used in high-speed applications in the clock/timing domains. It is a 2-pin, open-drain device that works as a dual-wire, programmable delay line used to extend the reach of high-speed clock signals. It can provide extended delay of eleven clock edges on a different output lead for reliable applications for multiple clock domains and simultaneous operation.

The DS1013M-60+ provides a low-cost, plug-in solution for integrated-circuit operating frequency requirements from sub-GHz to multigigahertz frequencies. With an adjustable resolution of 156 fs (femtoseconds) per tap, it can accurately extend the reach of clock edges up to 2.3 ns (nano seconds) while maintaining quality performance at noiseless frequencies. It operates over a wide range temperature range of -40 ˚C to +100 ˚C.

The DS1013M-60+ is used in a variety of electronic product applications. It provides clock signal extension for field-programmable gate arrays (FPGAs) used in telecommunications and networking, allowing device designers more flexibility in their design. It can also be used to extend the bandwidth of delay-locked loop (DLL) circuits commonly found in digital signal processing equipment. DS1013M-60+ can also be used in the clock/timing of numerous processor architectures including AMD Opteron processors, IBM Power-PC processors, Intel Pentium 4 processors, and others.

The DS1013M-60+ is a reliable, highly-integrated device that operates on tiny electrical signals and offers precise delays of its own clock pulse. It is highly efficient, requires minimal power and offers excellent thermal performance. The main feature of this device is its programmable configuration settings, which can be controlled through an external interface. The DS1013M-60+ is ideal for applications where reliable and accurate timing is essential.

The DS1013M-60+ works on an open-drain, two-pin configuration. It can be programmed to provide delay of up to 11 clock edges. The clock edge delay can be adjusted from 156 fs to 2.3 ns via an 8-bit register.The control register can be programmed either directly through an external interface or through a higher-level controller. On-chip control logic generates a logic-low output signal for as many clock edges as programmed in the register. This signal is then used to trigger the delay circuit. The on-chip logic also provides a clock-set signal and a reset signal.

The DS1013M-60+ features low power consumption, high speed operation, and durability, making it an ideal choice for a variety of clock and timing applications. The device can be used in multiple clock domains and can be easily configured to meet individual application requirements. The versatility of the DS1013M-60+ makes it a popular choice for a multitude of design applications and can help OEMs reduce design cycle times.

The specific data is subject to PDF, and the above content is for reference