DS1100LZ-100+

Series:	--
Packaging:	Tube
Part Status:	Active
Number of Taps/Steps:	5
Function:	Nonprogrammable
Delay to 1st Tap:	20ns
Tap Increment:	20ns
Available Total Delays:	100ns
Number of Independent Delays:	1
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	DS1100L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to DS1100LZ-100+ Clock/Timing Delay Lines

The DS1100LZ-100+ is a programmable clock/timing delay line designed to meet the requirements of a variety of communication and industrial applications. Its state-of-the-art surface mount packaging and onboard microprocessor enable a small footprint and low power consumption. Ideal for embedded, high reliability applications, the DS1100LZ-100+ provides an adjustable delay of up to 12.8ns (min–max) and has adjustable data edge transition detectors that improve the accuracy of data timing and reduce signal jitter. The DS1100LZ-100+ is manufactured using a combination of advanced semiconductor technology and design techniques, providing reliable operation under extended temperature ranges and a wide range of voltages.

Application Field

The DS1100LZ-100+ can be used in a wide range of applications where time delays, jitter management, or network synchronization are desired. Some of the most common applications include high-speed networking and communications, advanced networking protocols such as PTP, Delay-Locked Loops and Synchronous Ethernet, telecom switching and routing, and mission-critical industrial systems.The DS1100LZ-100+ is also ideal for applications requiring a low-jitter external clocking signal source, such as consumer audio and video applications. This device is well-suited for deriving an outgoing clock signal from an incoming reference clock, which is often needed for IEEE 1588-compliant systems.

Working Principle

The DS1100LZ-100+ works by generating a variable-length signal delay from an input signal. It is designed with a built-in variable-delay generator that is programmed through a configuration register. All of the customizable settings are stored in the configuration register, which can be set or changed at any time. The on-board digital-to-analog converter (DAC) is then used to generate an adjustable analog voltage that is used to control the delay. The DAC controls the clock rate, which is then sent to the input signal. This process is repeated until the desired delay is achieved. Once the delay has been adjusted, the DS1100LZ-100+ is designed to provide output that is synchronized to the input signal, so that both incoming and outgoing signals are aligned. This is achieved through the use of on-board delay-locked loop technology and edge-triggered transition detection. The DS1100LZ-100+ is also equipped with a built-in jitter attenuation logic, which is used to minimize signal jitter, ensuring a high-quality output signal that is suitable for a wide range of networking, communications, and industrial applications.

Conclusion

The DS1100LZ-100+ is an ideal solution for applications requiring a low-jitter clock/timing delay line with adjustable delay, jitter suppression, and clock synchronization capabilities. With its small footprint and low power consumption, the DS1100LZ-100+ is a perfect fit for embedded and high reliability applications. Its wide range of customizable settings and adjustable delay make it a great choice for a variety of clock/timing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description